Archos 500973 user manual Scheduling Your Recording, Select OK, Òiwtcvkqp 

TV+ MANUAL V1.0 THE TV PROGRAM GUIDE > P. 66

-“Key: -/--”:Set to “On” if normally, you need to press a special key on your tuner’s remote control before entering a channel with several digit numbers (that is to say a channel greater than 9). This key is often represented with this symbol: “-/--”.

-“Switches on with”: see below.

-“Time until video”: see below.

If the ARCHOS did not manage to switch your tuner to the selected channel, you can try using a different ON/OFF code (see: 1st Test: turning your tuner off) DQGGRWKHnd test again.

3.After you selected “Yes” at the end of the 2nd step, the following screen appears. You will have to set these two parameters:

-“Switches on with”: this depends on what key you normally press, on your tuner’s remote control, to turn it on. If you normally press the “Power” key, select “Power”. If you can press any channel key, then select “Any channel”. If you can press any key, select “Any key”.

-“Time until video”: select the amount of time it normally takes between the moment you turn on your tuner, and the moment the image appears on your TV (“0...10 seconds”, “10...30 seconds”, “>30 seconds”).

4.9JGP[QWJCXGÒPKUJGFUGNGEVmDonenCPFCEQPÒTOCVKQPOGUUCIGYKNNCRRGCT

Select “OK”.

9.5 SCHEDULING YOUR RECORDING

 In the Home screen, select the “Recorder” icon to display the ARCHOS TV Program Guide.

2.This screen’s menu items will al- low you to choose a different day, update the Program Guide data, or change various settings (program guide update and channel list con-

ÒIWTCVKQP