Dukane 28A9017 Effective Range and Distance of the Remote Control Unit, Installing the Projector

Page 18
Effective Range and Distance of the Remote Control Unit

Installing the Projector

Effective Range and Distance of the Remote Control Unit

The operable distance of the remote control unit is about 7m for direct reception. The remote control unit can be used by having the transmission signal reflected off a screen. In this case, please set the total distance A + B where A is the distance from

projector to screen and B is the distance from screen to remote control, within 7m. The operable angles of the remote control

unit are 30˚ right and left, and 20˚ up and down.

Using as a wireless remote control unit

As the effect of signals reflected from the remote control unit differ with the type of screen used, effective range and distance may decrease.

Screen

30˚

30˚ Using as a wireless remote control unitRemote Control Sensor Using as a wired Remote Control(rear)

Aim the remote control unit towards the remote sen- sor on the front or rear of the projector. The operable distance of the remote control unit is about 7m for di- rect reception. If the remote control fails to work prop- erly, move closer to the projector.

20˚

 

Projector

Projector

 

 

 

20˚

A

 

30˚

 

 

B

 

 

30˚

 

 

 

20˚

 

 

 

20˚

Remote Control

 

Remote Control

Unit

 

 

Unit

Using as a wired Remote Control

By connecting a separately sold remote control (RM-M3010) and cable (about 3m: QAM0081-001/ about 15m: QAM0247-001) to the REMOTE terminal, the remote control can be used as a wired control unit. When connected to the cable, the remote control’s transmitter and the projector’s sensor do not function. Please keep within the range of the remote cable length. War- ranty is not extended to the case where an extension cord is used.

❈The ESCAPE button on the separately sold remote control (RM-M3010) is equivalent to the EXIT button on the supplied remote control unit. There is no equivalent to the H, V-KEYSTONE and FOCUS buttons found on the supplied remote control.

QUICK

ALIGN.OPERATE

PC VIDEO

HIDE

DIGITAL VOLUME FREEZE ZOOM

PRESETMENU

REMOTE

RS-232C OUT

 

CONTROL

Remote control

Projector

(sold separately)

 

 

Remote Cable

 

(sold separately)

Again, when a remote cable is connected to the REMOTE terminal of the projector, the sensor does not work. Check to see if the cable is connected. When a remote cable is connected to the remote control terminal, the transmitter does not work.

ESCAPEENTER

When the remote control unit fails to work properly

•When the batteries in the remote control unit are exhausted, improper functioning will occur. Please replace with new batteries.

•When either the remote control unit or projector alone is connected to the remote cable, the item connected will not be able to work. Please check the cable connection.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents D-ILA Multimedia Projector Model 28A9017Users Manual Audio Visual ProductsNOTICE For USA SAFETY PRECAUTIONSIMPORTANT INFORMATION FCC INFORMATION U.S.A. onlySafety Precaution DO NOT allow any unqualified person to install the unitHow To Replace The Fuse POWER CONNECTIONPOWER CONNECTION United Kingdom only Do not cut off the main plug from this equipmentAbout burning-in of the D-ILA device Using the screen mode switch functionCleaning the lens Viewing conditions Optional Accessories ContentsAccessories Adjustments and Settings Using Menus2 AC Power Input Terminal Controls and FeaturesFront Side/ Top Surface/ Left Side 4 Foot Lever for front adjustable footBottom Surface Controls and FeaturesRear Side/ Right Side/ Bottom Surface q Connector Panel2 PC1 Input Terminal Connector Panel1 PC2 Input Terminal 3 PC3 Input TerminalSTAND BY light on Indicator Display on the Control PanelControl Panel on the Projector OPERATE light on9 LAMP Indicator 1 STAND BY Indicator2 OPERATE Indicator 4 VOLUME ª / · buttonsw PC button Remote Control Unitt VOLUME button e H-KEYSTONE buttont VOLUME ª / · button Controls and Features1 Remote Control’s signal transmitter i PRESET buttonBattery Life Loading Batteries into the Remote ControlPrecautions for using batteries Battery LeakageInstallation Environment Installing the ProjectorPrecautions for Installation Precaution for UsageMounting the Projector Installing the Projector against the ScreenInstalling the Projector Precaution for ceiling-mount Screen installation Installing the ProjectorProjection Distance and Screen Size  Relationship between projection distance and projection screen size Using as a wired Remote Control Effective Range and Distance of the Remote Control Unit Using as a wireless remote control unit When the remote control unit fails to work properly Video signals Connecting to Various DevicesSignals that can be input into the projector  Computer signalsSignal Connecting to Various Devices Allowable input signals HorPixels Connecting to Video Devices Connecting to DevicesConnecting to Various Devices Right side of projectorconnector  Connecting to ComputersPersonal Computer connector cable supplied Desktop type DOS/V, etc Desktop type DOS/V, PC-9800 etc Control from external device Connection for controlling more than one projectorCautions Against Fire and Electric Shock Connecting the Power Cord suppliedWhen using the projector  Removing the Lens Cap1. Power On Basic OperationsBasic Operation Procedures 1 The STAND BY indicator lights up when the power cord is connected3. Adjusting the Zoom Ring the screen size for DLA Basic Operations Display using the direct buttons 4. Adjusting the Focus Ring Focus5. Adjusting the Sound Volume Basic OperationsPower Off  To increase the volume press VOLUME ª 0Frequently used Convenient Functions 1 Magnifying power display “Digital zoom” Display Enlarging the ImagePress the HIDE button once Turning Off Image and SoundDisplaying a Still Picture Press the FREEZE buttonRemoving the Trapezoidal Distortion of the Image Press V-KEYSTONE / to adjust in the vertical directionPress H-KEYSTONE / to adjust in the horizontal direction  “Vert. Keystone” Display Screen size display Using the Quick Alignment functionSelecting the Screen Size Press the QUICK ALIGN. Quick Alignment buttonVideo Input selection Adjustments and Settings Using MenusThe Menu Structure Main menuAdjustments and Settings Using Menus When PC input is selectedPhase Adjustments and Settings Using MenusWhen no image signal is inputted SubmenuThe Menu Operation Buttons Remote control unitmenus “Image adj.”, “Set up” Button5. Press the CURSOR buttons / to change the setting value The Procedure for Menu Operation4. Press the CURSOR buttons / to select an adjust- ment item 6. To EXIT after the adjustment, press the EXIT button3 “Set up” menu Adjustment and Setting Using MenusThe Menu Configuration When Video input is selected When PC input is selected4 “Position” menu When there is no image signal inputted6 “Logo” menu 5 “Decoder” menu9 “Options” menu q “Signal can not be captured”8 “Capture start” “Page 1”When video input is selected When no image signal is inputtede “Information” menu 2. Press the MENU button Editing and Projecting Logo1. Project the images to be included in your logo 3. Select “Logo” with the CURSOR buttons  / 3. Select “Vert. move” with the CURSOR buttons  /  Editing and projecting logo1. Set the menu position as required 4. Select “Horiz. size” with the CURSOR buttons  / The light source lamp and its lamp time The procedure for lamp replacementReplacing the Lamp About lamp replacement4. Insert the new lamp unit until it is fully in Replacing the Lamp3. Remove the lamp unit 5. Close the handle, and tighten the screwCaution for reset work Resetting the lamp timeReplacing the Lamp 2. Press the EXIT, HIDE, PRESET buttons on the remote3. Clean the filter Cleaning and Replacing the Filter1. Pull out the power cord from the wall outlet 4. Reinstalling the filterPower is not sup TroubleshootingSymptom With power on, thefuzzy TroubleshootingVideo image is Video image is abWhat to do when these messages are displayed Cause ContentsMessage What to do when these messages are displayed Please follow the procedures below Warning Indication About warning indicators  Action to be taken upon warning indicationsSpecifications 20% ~ 80% no condensation Top SpecificationsDimensions unit mm  Bottom Y/C terminal Signal namePin arrangement  RS-232C IN/OUT terminal RS-232C external control 1. Communication Specifications2. Command Format Header3. External control command table Power onLEGAL INFORMATION FIVE-YEAR LIMITED WARRANTYSERVICE & REPAIR 676-2486 Parts & ServiceAudio Visual Products 584-5156
Top Page Image Contents