Dukane 28A9017 Connecting to Various Devices,  Connecting to Computers, To monitor, connector

Page 22
Connecting to Computers

Connecting to Various Devices

Connecting to Computers

Thoroughly read the manuals that come with the computer used.

Use the supplied computer connection cable. Also prepare cables for connecting the devices.

Desktop type (DOS/V, etc.)

Desktop type (DOS/V, PC-9800 etc.)

When the PC2 input terminal is used, “PC2 (BNC)” must be selected from the “Options” menu. (page 39)

When connecting an audio output terminal such as a computer sound source to the projector, connect to the AUDIO terminal using the separately available audio cable.

When connecting to PC-9800 Series computers, a separately available conver- sion adapter is necessary. Please confirm the monitor connector type before use.

 

Personal Computer connector cable (supplied)

 

To monitor

 

 

 

connector

Separated cable (separately available)

 

 

To PC2

 

 

 

 

To PC1

To DVI

 

R PR/CR G Y B PB/CS H/CS

V

DVI

 

 

PC1

PC3

 

PC2

 

DC OUT

REMOTE

RS-232C OUT

RS-232C IN

Y/C

VIDEO

5V }1.5A AUDIO IN

 

CONTROL

 

VIDEO IN

Desktop type

Conversion

Right side of projector

adapter for MAC

(Macintosh)

(separately available)

 

 

 

 

 

To monitor

 

 

connector

Notebook Type

To monitor connector

There are some notebook type computers that do not allow the computer’ s LCD to work if an external display device is connected. With such computers, the LCD display and external display output need to be switched.

Desktop type

22

Image 22
Contents D-ILA Multimedia Projector Model 28A9017Users Manual Audio Visual ProductsNOTICE For USA SAFETY PRECAUTIONSIMPORTANT INFORMATION FCC INFORMATION U.S.A. onlySafety Precaution DO NOT allow any unqualified person to install the unitHow To Replace The Fuse POWER CONNECTIONPOWER CONNECTION United Kingdom only Do not cut off the main plug from this equipmentAbout burning-in of the D-ILA device Using the screen mode switch functionCleaning the lens Viewing conditions Optional Accessories ContentsAccessories Adjustments and Settings Using Menus2 AC Power Input Terminal Controls and FeaturesFront Side/ Top Surface/ Left Side 4 Foot Lever for front adjustable footBottom Surface Controls and FeaturesRear Side/ Right Side/ Bottom Surface q Connector Panel2 PC1 Input Terminal Connector Panel1 PC2 Input Terminal 3 PC3 Input TerminalSTAND BY light on Indicator Display on the Control PanelControl Panel on the Projector OPERATE light on9 LAMP Indicator 1 STAND BY Indicator2 OPERATE Indicator 4 VOLUME ª / · buttonsw PC button Remote Control Unitt VOLUME button e H-KEYSTONE buttont VOLUME ª / · button Controls and Features1 Remote Control’s signal transmitter i PRESET buttonBattery Life Loading Batteries into the Remote ControlPrecautions for using batteries Battery LeakageInstallation Environment Installing the ProjectorPrecautions for Installation Precaution for UsageMounting the Projector Installing the Projector against the ScreenInstalling the Projector Precaution for ceiling-mount Screen installation Installing the ProjectorProjection Distance and Screen Size  Relationship between projection distance and projection screen size Using as a wired Remote Control Effective Range and Distance of the Remote Control Unit Using as a wireless remote control unit When the remote control unit fails to work properly Video signals Connecting to Various DevicesSignals that can be input into the projector  Computer signalsSignal Connecting to Various Devices Allowable input signals HorPixels Connecting to Video Devices Connecting to DevicesConnecting to Various Devices Right side of projectorconnector  Connecting to ComputersPersonal Computer connector cable supplied Desktop type DOS/V, etc Desktop type DOS/V, PC-9800 etc Control from external device Connection for controlling more than one projectorCautions Against Fire and Electric Shock Connecting the Power Cord suppliedWhen using the projector  Removing the Lens Cap1. Power On Basic OperationsBasic Operation Procedures 1 The STAND BY indicator lights up when the power cord is connected3. Adjusting the Zoom Ring the screen size for DLA Basic Operations Display using the direct buttons 4. Adjusting the Focus Ring Focus5. Adjusting the Sound Volume Basic OperationsPower Off  To increase the volume press VOLUME ª 0Frequently used Convenient Functions 1 Magnifying power display “Digital zoom” Display Enlarging the ImagePress the HIDE button once Turning Off Image and SoundDisplaying a Still Picture Press the FREEZE buttonRemoving the Trapezoidal Distortion of the Image Press V-KEYSTONE / to adjust in the vertical directionPress H-KEYSTONE / to adjust in the horizontal direction  “Vert. Keystone” Display Screen size display Using the Quick Alignment functionSelecting the Screen Size Press the QUICK ALIGN. Quick Alignment buttonVideo Input selection Adjustments and Settings Using MenusThe Menu Structure Main menuAdjustments and Settings Using Menus When PC input is selectedPhase Adjustments and Settings Using MenusWhen no image signal is inputted SubmenuThe Menu Operation Buttons Remote control unitmenus “Image adj.”, “Set up” Button5. Press the CURSOR buttons / to change the setting value The Procedure for Menu Operation4. Press the CURSOR buttons / to select an adjust- ment item 6. To EXIT after the adjustment, press the EXIT button3 “Set up” menu Adjustment and Setting Using MenusThe Menu Configuration When Video input is selected When PC input is selected4 “Position” menu When there is no image signal inputted6 “Logo” menu 5 “Decoder” menu9 “Options” menu q “Signal can not be captured”8 “Capture start” “Page 1”When no image signal is inputted When video input is selectede “Information” menu 2. Press the MENU button Editing and Projecting Logo1. Project the images to be included in your logo 3. Select “Logo” with the CURSOR buttons  / 3. Select “Vert. move” with the CURSOR buttons  /  Editing and projecting logo1. Set the menu position as required 4. Select “Horiz. size” with the CURSOR buttons  / The light source lamp and its lamp time The procedure for lamp replacementReplacing the Lamp About lamp replacement4. Insert the new lamp unit until it is fully in Replacing the Lamp3. Remove the lamp unit 5. Close the handle, and tighten the screwCaution for reset work Resetting the lamp timeReplacing the Lamp 2. Press the EXIT, HIDE, PRESET buttons on the remote3. Clean the filter Cleaning and Replacing the Filter1. Pull out the power cord from the wall outlet 4. Reinstalling the filterPower is not sup TroubleshootingSymptom With power on, thefuzzy TroubleshootingVideo image is Video image is abCause Contents What to do when these messages are displayedMessage What to do when these messages are displayed Please follow the procedures below Warning Indication About warning indicators  Action to be taken upon warning indicationsSpecifications 20% ~ 80% no condensation Top SpecificationsDimensions unit mm  Bottom Y/C terminal Signal namePin arrangement  RS-232C IN/OUT terminal RS-232C external control 1. Communication Specifications2. Command Format Header3. External control command table Power onFIVE-YEAR LIMITED WARRANTY LEGAL INFORMATIONSERVICE & REPAIR 676-2486 Parts & ServiceAudio Visual Products 584-5156