Dukane 28A8711 user manual Turning on the Power

Page 23

TURNING ON THE POWER

Precautions

Connect all devices to be used to the projector prior to turning on the power. 8 ～ 12

WARNING When the power is ON, a strong light is emitted. Do not look into the lens.

LASER

INDICATOR

STANDBY/ON VIDEO RGB

UP

FOCUS ZOOM PAGE

DOWN

1	Make sure that the power cord is firmly and
	correctly connected to the projector and outlet
	3

BLANKLASER

Turn on the projector's power

2 Set the power switch to [ ] (ON). The STANDBY/ON indicator will light to solid orange.

power switch

Control panel

RGB	INPUT
RGB	KEYSTONE
BNC
DVI	ONE TOUCH
DVI
VIDEO	FOCUS	ZOOM
VIDEO	RESET
	RESET
S-VIDEO
COMPONENT	MENU
COMPONENT

STANDBY/ON indicator

STANDBY/ON

TENP

LANP

NOTE Turn the power on/off in right order.

•Power on the projector before the computer or video tape recorder.

•Power off the projector after the computer or video tape recorder.

3 Press the STANDBY/ON button (control panel or remote control)

•The projector begins warming up and the STANDBY/ON indicator blinks green.

	• The STANDBY/ON indicator stops blinking	STANDBY/ON
	• The STANDBY/ON indicator stops blinking
	and lights to solid green once the
	projector's power is completely on.
4	Remove the lens cap
4	The picture is projected.

15

Image 23

Contents Model 28A8711 Page Page Page Page Page Page Page Contents Adapter Projector FeaturesPower cord ControlDevices you will be using to the projector Only use the power cord that came with the projectorPart Names Remote Control Turn the elevator screw to fine tune Setting UP the ProjectorAdjusting the Projectors Elevator Feet Press and hold in the elevator ButtonsScreen Adjusting the Screen Size and Projection DistanceConnecting Your Devices Function Projector Port Connection Cables Ports and CablesConnecting to a Computer Connecting Your DevicesA a a BNC Input DVI InputConnecting to a Display Monitor Connecting to a DVD PlayerConnecting to a VCR Close the battery cover Using the Remote ControlPutting batteries into the remote control unit Remove the battery coverMeters with a 40-degree range Operating the remote controlRemote control in an area free from obstacles Turning on the Power Selecting an Input Signal Turning OFF the Power Temporarily Muting the Sound Adjusting the VolumePress the Volume button Use the lever switch / to adjust the volumePress the Position button Adjusting the PositionUse the , , , buttons to adjust the position Press the Auto button Using the Automatic Adjustment FeatureAutomatic Adjustment for RGB Input Automatic Adjustment for Video InputOn the screen to aid you in correcting the distortion Correcting Keystone DistortionsPress the Keystone button As illustrated on the right, a dialog will appearFreezing the Screen Using the Magnify FeatureYou can activate the following functions just by Adjusting Screen with ONE-TOUCHWas begun When BNC RGB is selected Press the ONE Touch buttonPress the Blank button Selecting the Aspect RatioTemporarily Blanking the Screen Press the Aspect buttonPress the Menu button Using the Menu FunctionsUse the lever switch To adjust the level Operating the PC Screen Available Functions Remote Control OperationDo not use the projector with the lamp cover removed High Voltage High Temperature High PressureLamp Push Replacing the lampCaring for the air filter AIR FilterReplacing the air filter Caring for the lens Caring for the cabinet and remote control transmitterOther Care Caring for the inside of the projectorPage For Technical see the end of this manual Main Menu Multifunctional SettingsUse the lever switch Main MenuPICTURE-2 Menu PICTURE-1 MenuPICTURE-2 Menu PICTURE-1 MenuInput Menu Input MenuAuto Menu Auto MenuScreen Menu Screen MenuOption Menu Wireless MenuOption Menu Related Messages Power Lamp Temp Regarding the Indicator LampsVol.2-7 Phenomena That May Easily Be Mistaken for Machine DefectsVol.2-2 Vol.2-3Unit mm SpecificationsDimension Diagram SpecificationWarranty and AFTER-SERVICE Sub 15-pin Shrink Signal Connector PIN AssignmentRGB in 1/2 Resolution FH kHz FV Hz Rating Signal mode Display mode Example of Computer SignalInitial SET Signals PS/2 Mouse Connection to the Mouse ControlADB Mouse USB MouseProtocol Command dataConsist of header 7 bytes + command data 6 bytes RS-232C CommunicationIncreasing the projector setting value Increment command Requesting projector status Get commandChanging the projector settings Set command Using the projector default settings Reset CommandC4 D3 Command data chartBe EF BA D2 Be EF AD D0 Be EF CB D0 Legal Information Audio Visual Products