Dukane 28A8711 Multifunctional Settings, Main Menu, Use the lever switch, Or Enter button

Page 42

MULTIFUNCTIONAL SETTINGS

This device has 8 separate menus: MAIN, PICTURE-1, PICTURE-2, INPUT, AUTO, SCREEN, OPTION, WIRELESS. Each of these menus is operated using the same methods. The basic operations of these menus are as follows.

Menu screen display : Press the MENU button.
Menu selection	: Use the lever switch	to select a menu name, then press the
	or ENTER button.
Item selection	: Use the lever switch	to select an item, then press the	or
	ENTER button.

Return menu to last previous screen: Press the button or the ESC button.

Execution of settings and/or adjustments: Perform the operation using the lever switch .

(For further details, read the explanation for each separate menu.)

Initialization of settings and/or adjustments: During operation, press the RESET button. (Functions that are executed at the same time as a selection, including H PHASE, LANGUAGE selection, and ADJUST, will not be reset.)

End menu operations: Press the MENU button, or do not perform any operation for several seconds.

MAIN Menu

With the MAIN menu, the seven items shown in the Table below can be performed.

Perform each operation in accordance with the instructions in the Table.

MENU

MAIN	BRIGHT
PICTURE-1	CONTRAST
PICTURE-2	ASPECT
INPUT	PICT. POSIT.
AUTO	GAMMA
SCREEN	MIRROR
OPTION	LANGUAGE
WIRELESS	12
: SELECT

MAIN Menu		Example : MAIN Menu
MAIN Menu		(BRIGHT)
Item		Description
BRIGHT	Adjust Brightness: Light	Dark
CONTRAST	Adjust Contrast: Strong	Weak

Select Aspect Ratio:

At RGB Input or Hi-Vision 1125i(1035i/1080i)/750p of COMPONENT VIDEO Input:

ASPECT 4:3 16:9

At VIDEO Input, S-VIDEO Input or 525i/525p/625i of COMPONENT VIDEO Input:

4:3 16:9 SMALL

• The SMALL picture may not be displayed correctly with certain input signals.

Select Picture Position (for 16:9/SMALL Picture):

PICT.POSIT.	TOP	CENTER	BOTTOM

GAMMA	Select Gamma Mode:
	NORMAL	CINEMA		DYNAMIC

MIRROR	Select Mirror Status:
	NORMAL	H:INVERT		V:INVERT	H&V:INVERT

	Select Menu Language:
LANGUAGE	ENGLISH	FRANÇAIS		DEUTSCH	ESPAÑOL
	ITALIANO	NORSK		NEDERLANDS

	POTUGUÊS

2

Image 42

Contents Model 28A8711 Page Page Page Page Page Page Page Contents Control Projector FeaturesPower cord AdapterOnly use the power cord that came with the projector Devices you will be using to the projectorPart Names Remote Control Press and hold in the elevator Buttons Setting UP the ProjectorAdjusting the Projectors Elevator Feet Turn the elevator screw to fine tuneAdjusting the Screen Size and Projection Distance ScreenConnecting Your Devices Ports and Cables Function Projector Port Connection CablesConnecting Your Devices Connecting to a ComputerBNC Input DVI Input A a aConnecting to a DVD Player Connecting to a VCRConnecting to a Display Monitor Remove the battery cover Using the Remote ControlPutting batteries into the remote control unit Close the battery coverOperating the remote control Remote control in an area free from obstaclesMeters with a 40-degree range Turning on the Power Selecting an Input Signal Turning OFF the Power Use the lever switch / to adjust the volume Adjusting the VolumePress the Volume button Temporarily Muting the SoundAdjusting the Position Use the , , , buttons to adjust the positionPress the Position button Automatic Adjustment for Video Input Using the Automatic Adjustment FeatureAutomatic Adjustment for RGB Input Press the Auto buttonAs illustrated on the right, a dialog will appear Correcting Keystone DistortionsPress the Keystone button On the screen to aid you in correcting the distortionUsing the Magnify Feature Freezing the ScreenPress the ONE Touch button Adjusting Screen with ONE-TOUCHWas begun When BNC RGB is selected You can activate the following functions just byPress the Aspect button Selecting the Aspect RatioTemporarily Blanking the Screen Press the Blank buttonUsing the Menu Functions Use the lever switch To adjust the levelPress the Menu button Available Functions Remote Control Operation Operating the PC ScreenHigh Voltage High Temperature High Pressure LampDo not use the projector with the lamp cover removed Replacing the lamp PushAIR Filter Caring for the air filterReplacing the air filter Caring for the inside of the projector Caring for the cabinet and remote control transmitterOther Care Caring for the lensPage For Technical see the end of this manual Main Menu Multifunctional SettingsUse the lever switch Main MenuPICTURE-1 Menu PICTURE-1 MenuPICTURE-2 Menu PICTURE-2 MenuInput Menu Input MenuAuto Menu Auto MenuScreen Menu Screen MenuWireless Menu Option MenuOption Menu Related Messages Regarding the Indicator Lamps Power Lamp TempVol.2-3 Phenomena That May Easily Be Mistaken for Machine DefectsVol.2-2 Vol.2-7Specification SpecificationsDimension Diagram Unit mmWarranty and AFTER-SERVICE Signal Connector PIN Assignment RGB in 1/2Sub 15-pin Shrink Example of Computer Signal Resolution FH kHz FV Hz Rating Signal mode Display modeInitial SET Signals USB Mouse Connection to the Mouse ControlADB Mouse PS/2 MouseRS-232C Communication Command dataConsist of header 7 bytes + command data 6 bytes ProtocolUsing the projector default settings Reset Command Requesting projector status Get commandChanging the projector settings Set command Increasing the projector setting value Increment commandCommand data chart C4 D3Be EF BA D2 Be EF AD D0 Be EF CB D0 Legal Information Audio Visual Products