Dukane 28A8711 user manual Other Care, Caring for the inside of the projector, Caring for the lens

Page 39

OTHER CARE

Caring for the inside of the projector :

In order to ensure the safe use of your projector, please have it cleaned and inspected by your local dealer about once every 2 years. Never try to care for the inside of the unit yourself. Doing so is dangerous.

Caring for the lens :

Lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch the lens directly with your hand.

Caring for the cabinet and remote control transmitter :

Wipe lightly with gauze or a soft cloth. If soiling is severe, dip a soft cloth in water or a neutral cleanser diluted in water, and wipe lightly after wringing well. Then, wipe lightly with a soft, dry cloth.

ATTENTION • Make sure to turn off the power and unplug the power cord before caring for the unit. Please carefully read "Safety Instructions" in this manual, in order to care for your projector correctly.

•Do not use cleaners or chemicals other than those listed above, including benzene and paint thinner.

•Do not use aerosols or sprays.

•Do not polish or wipe with hard objects.

31

Page 38 Page 40
Image 39
Page 38 Page 40
Contents
Model 28A8711 Page Page Page Page Page Page Page Contents Adapter Projector FeaturesPower cord ControlDevices you will be using to the projector Only use the power cord that came with the projectorPart Names Remote Control Turn the elevator screw to fine tune Setting UP the ProjectorAdjusting the Projectors Elevator Feet Press and hold in the elevator ButtonsScreen Adjusting the Screen Size and Projection DistanceConnecting Your Devices Function Projector Port Connection Cables Ports and CablesConnecting to a Computer Connecting Your DevicesA a a BNC Input DVI InputConnecting to a DVD Player Connecting to a VCRConnecting to a Display Monitor Close the battery cover Using the Remote ControlPutting batteries into the remote control unit Remove the battery coverOperating the remote control Remote control in an area free from obstaclesMeters with a 40-degree range Turning on the Power Selecting an Input Signal Turning OFF the Power Temporarily Muting the Sound Adjusting the VolumePress the Volume button Use the lever switch / to adjust the volumeAdjusting the Position Use the , , , buttons to adjust the positionPress the Position button Press the Auto button Using the Automatic Adjustment FeatureAutomatic Adjustment for RGB Input Automatic Adjustment for Video InputOn the screen to aid you in correcting the distortion Correcting Keystone DistortionsPress the Keystone button As illustrated on the right, a dialog will appearFreezing the Screen Using the Magnify FeatureYou can activate the following functions just by Adjusting Screen with ONE-TOUCHWas begun When BNC RGB is selected Press the ONE Touch buttonPress the Blank button Selecting the Aspect RatioTemporarily Blanking the Screen Press the Aspect buttonUsing the Menu Functions Use the lever switch To adjust the levelPress the Menu button Operating the PC Screen Available Functions Remote Control Operation High Voltage High Temperature High Pressure Lamp Do not use the projector with the lamp cover removed Push Replacing the lampCaring for the air filter AIR FilterReplacing the air filter Caring for the lens Caring for the cabinet and remote control transmitterOther Care Caring for the inside of the projectorPage For Technical see the end of this manual Main Menu Multifunctional SettingsUse the lever switch Main MenuPICTURE-2 Menu PICTURE-1 MenuPICTURE-2 Menu PICTURE-1 MenuInput Menu Input MenuAuto Menu Auto MenuScreen Menu Screen MenuWireless Menu Option MenuOption Menu Related Messages Power Lamp Temp Regarding the Indicator LampsVol.2-7 Phenomena That May Easily Be Mistaken for Machine DefectsVol.2-2 Vol.2-3Unit mm SpecificationsDimension Diagram SpecificationWarranty and AFTER-SERVICE Signal Connector PIN Assignment RGB in 1/2Sub 15-pin Shrink Resolution FH kHz FV Hz Rating Signal mode Display mode Example of Computer SignalInitial SET Signals PS/2 Mouse Connection to the Mouse ControlADB Mouse USB MouseProtocol Command dataConsist of header 7 bytes + command data 6 bytes RS-232C CommunicationIncreasing the projector setting value Increment command Requesting projector status Get commandChanging the projector settings Set command Using the projector default settings Reset CommandC4 D3 Command data chartBe EF BA D2 Be EF AD D0 Be EF CB D0 Legal Information Audio Visual Products
Top Page Image Contents