Dukane 28A8711 user manual Related Messages

WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED

Related Messages

When the unit's power is ON, messages such as those shown below may be displayed. When any such message is displayed on the screen, please respond as described below.

		Message				Description
	CHANGE THE LAMP				Lamp usage time is approaching 2,000 hours. (Note 2)
	AFTER REPLACING LAMP,				Preparation of a new lamp, and an early lamp change, is
					recommended. After you have changed the lamp, please be
	RESET THE LAMP TIMER.
			(Note 1)		sure to reset the lamp timer.
	CHANGE THE LAMP				Lamp usage time is approaching 2,000 hours. A lamp change
					within	hours is recommended. (Note 2)
	AFTER REPLACING LAMP,
					When lamp usage reaches 2,000 hours, the power will
	RESET THE LAMP TIMER.
					automatically be turned OFF. Please change the lamp by
THE POWER WILL TURN OFF
					referring to “THE LAMP” (Vol.1 27 ). After you have
	AFTER		hr.		changed the lamp, please be sure to reset the lamp
			(Note 1)		timer.
	CHANGE THE LAMP				As lamp use has reached 2,000 hours, the power will soon be
					automatically turned OFF. (Note 2)
	AFTER REPLACING LAMP,
					Please immediately turn the power OFF, and follow the
	RESET THE LAMP TIMER.
					instructions in the “THE LAMP” (Vol.1 27 ).
THE POWER WILL TURN OFF
					After you have changed the lamp, please be sure to reset the
		AFTER 0 hr.			lamp timer. ( 7 )
	CLEAN THE AIR FILTER				A note of precaution when cleaning the air filter.
	AFTER CLEANING AIR FILTER,				After cleaning the filter, operate FILTER TIME of the OPTION
	RESET THE FILTER TIMER.				Menu (	7 ), and perform reset of the filter timer.
	NO INPUT IS DETECTED				There is no input signal.
					Please confirm the signal input connection, and the status of the
		ON
					signal source.
	SYNC IS OUT OF RANGE				The horizontal or vertical wavelength of the inputted signal is
					outside of the response parameters of this unit. Please confirm
ON	fH	kHz	fV	Hz
					the specs for this unit or the signal source specs.
					The internal portion temperature is rising. Please turn the power
					OFF, and allow the unit to cool down for approximately 20
					minutes. After having confirmed the following items, then please
	CHECK THE AIR FLOW				resent the power to ON.
					• Is there blockage of the air passage aperture?
					• Is the air filter dirty?
					• Does the peripheral temperature exceed 35°C?

NOTES

Note 1: Although this message will be automatically disappeared after around 3 minutes, it will be reappeared every time the power is turned ON.

Note 2: Lamps have a finite product life. Lamps are characterized by the fact that, after long hours of usage, a lamp will no longer light up, or the lamp will break or burst, etc. This unit is equipped with an automatic shut-down function, such that the power will automatically be turned OFF when lamp usage time has reached 2,000 hours. Please be aware, however, that among lamp types, there are major differences in product lifetimes; a lamp may thus fail to light even prior to the functioning of the automatic shut-down function of this unit.

8