Dukane P42A Wide Screen Operation with Computer Signals, Normal size screen 43 or Sxga

Page 13

Wide Screen Operation with Computer Signals

Switch to the wide screen mode to expand the 4 : 3 image to fill the entire screen.

1.Press the WIDE button on the remote control.

2.Within 3 seconds ...

Press the WIDE button again.

The screen size switches as follows:

→ NORMAL → ANAMORPHIC → ZOOM

NORMAL size screen (4:3 or SXGA 5:4)

The picture has the same size as the normal computer image.

ANAMORPHIC size screen

The image is expanded in the horizontal direction.

ZOOM size screen

When wide signals are input.

ANAMORPHIC size screen

Information

Supported resolution

See page 7 of Model Information for details on the display output of the various VESA signal standards supported by the monitor.

When 852 (848) dot 480 line wide VGA* signals with a vertical frequency of 60 Hz and horizontal frequency of 31.7 (31.0) kHz are in- put

Select an appropriate setting for RGB SELECT mode referring to the“ Table of Signals Supported” on page 7 of Model Information.

*“ VGA” , “ SVGA” and “ SXGA” are registered trademarks of IBM, Inc. of the United States.

Note:

Do not allow the displayed in 4:3 mode for an extended period. This can cause a phosphor burn-in.

13

Image 13

Contents Plasma Monitor Plasma monitor cleaning procedure PrecautionsImportant Information To avoid damage and prolong operating lifePrécautions Recommandations importantesMises en garde et précautions de sécurité AvertissementMéthode de nettoyage du moniteur à plasma Contents Ventilation Requirements for enclosure mounting InstallationBattery Installation and Replacement How to use the remote controlHandling the remote control Cable ManagementReceives the signals from the remote control Turns the monitor’s power on and offPart Names and Function Front ViewRear View/ Terminal Board Remote Control Basic Operations Wide Operations When viewing videos or digital video discsWhen wide signals are input Wide Screen Operation with Computer Signals Supported resolution Normal size screen 43 or SxgaMenu Operations OSM On Screen Menu ControlsMain menu Sub menu Menu Tree Restoring the factory default settings Only when Auto Picture is OFF RGB/PC onlyStoring picture settings Picture Settings MenuAdjusting the picture Reducing noise in the pictureAdjusting the color to the desired level Setting the color temperatureMaking the Low Tone adjustments Changing the Gamma CurveAdjusting the colors Adjusting the pedestal level black levelSetting the picture to suit the movie Cinema ModeImage Adjust Settings Menu Audio Settings MenuSetting the allocation of the audio connectors Adjusting the Position, Size, Fine Picture, Picture AdjSET UP Settings Menu Setting the video signal format Setting the signal and black level for DVI signalSetting the background color when no signal is being input Setting the position of the menu Setting the screen size for S1/S2 video inputResetting to the default values Turning on/off the menu displaySetting the power management for computer images Function Settings MenuPOWER/STANDBY indicator Setting the Input SkipOrbiter settings Peak Bright settingsINVERSE/WHITE Settings Soft Focus settingsSetting Closed Caption Signal Information MenuReducing the brightness of Closed Caption External Control Pin Assignments Symptom Checks Remedy TroubleshootingModel Information Important Safety Instructions Avertissment Important Information DOC avis de conformation AvertissementSpecifications Computer input signals supported by this system 42Wide VGA Supported resolutionPage Limited Warranty Plasma Monitors Audio Visual Products