Dukane P42A specifications

Page 36

*1 Only when using a graphic accelerator board that is capable of displaying 852480.

*2 Display only 400 lines with the screen center of the vertical orientation located at the center.

*3 The picture is displayed in the original resolution. The picture will be compressed for other signals.

*4 Aspect ratio is 5:4. This signal is converted to a 600 dots480 lines signal.

*5 Normally the RGB select mode suite for the input signals is set automatically. If the picture is not displayed properly, set the RGB mode prepared for the input signals listed in the table above.

*6 To connect the monitor to Macintosh computer, use the monitor adapter (D-Sub 15-pin) to your computer's video port.

*7 Other screen modes (ZOOM and STADIUM) are available as well.

*8 When viewing a moving picture at a vertical frequency greater than 65Hz, the picture may sometimes be unstable (jumpy). If this occurs, please set the refresh rate of the external equipment to 60Hz.

To view 480I@60Hz (480 interlaced lines, 60Hz refresh rate) or 576I@50Hz (567 interlaced lines, 50Hz refresh rate) when sync polarity is “ Sync on Green” , set “ RGB SELECT” to “ MOTION” .

*9 CVT standard compliant.

NOTE:

•While the input signals comply with the resolution listed in the table above, you may have to adjust the position and size of the picture or the fine picture because of errors in synchronization of your computer.

•This monitor has a resolution of 853 dots480 lines. It is recommended that the input signal should be VGA, wide VGA, or equivalent.

•With digital input some signals are not accepted.

•The sync may be disturbed when a nonstandard signal other than the aforementioned is input.

•If you are connecting a composite sync signal, use the HD terminal.

What is HDCP/HDCP technology?

HDCP is an acronym for High-bandwidth Digital Content Protection. High bandwidth Digital Content Protection (HDCP) is a system for preventing illegal copying of video data sent over a Digital Visual Interface (DVI).

If you are unable to view material via the DVI input, this does not necessarily mean the PDP is not functioning properly. With the implementation of HDCP, there may be cases in which certain content is protected with HDCP and might not be displayed due to the decision/intention of the HDCP community (Digital Content Protection, LLC).

•“IBM PC/AT” and “ VGA” are registered trademarks of International Business Machines, Inc. of the United States.

•“Apple Macintosh” is a registered trademark of Apple Computer, Inc. of the United States.

We hereby declare that the equipment specified above conforms to the technical standards as specified in the FCC Rules.

Page 35 Page 37
Image 36
Page 35 Page 37
Contents
Plasma Monitor Precautions Plasma monitor cleaning procedureImportant Information To avoid damage and prolong operating lifeRecommandations importantes PrécautionsMises en garde et précautions de sécurité AvertissementMéthode de nettoyage du moniteur à plasma Contents Installation Ventilation Requirements for enclosure mountingHow to use the remote control Battery Installation and ReplacementHandling the remote control Cable ManagementTurns the monitor’s power on and off Receives the signals from the remote controlPart Names and Function Front ViewRear View/ Terminal Board Remote Control Basic Operations When viewing videos or digital video discs Wide OperationsWide Screen Operation with Computer Signals When wide signals are input Supported resolution Normal size screen 43 or SxgaOSM On Screen Menu Controls Menu OperationsMenu Tree Main menu Sub menuOnly when Auto Picture is OFF RGB/PC only  Restoring the factory default settingsPicture Settings Menu Storing picture settingsAdjusting the picture Reducing noise in the pictureSetting the color temperature Adjusting the color to the desired levelMaking the Low Tone adjustments Changing the Gamma CurveAdjusting the pedestal level black level Adjusting the colorsSetting the picture to suit the movie  Cinema ModeAudio Settings Menu Image Adjust Settings MenuSetting the allocation of the audio connectors Adjusting the Position, Size, Fine Picture, Picture AdjSET UP Settings Menu Setting the signal and black level for DVI signal Setting the video signal formatSetting the background color when no signal is being input Setting the screen size for S1/S2 video input Setting the position of the menuResetting to the default values Turning on/off the menu displayFunction Settings Menu Setting the power management for computer imagesPOWER/STANDBY indicator Setting the Input SkipPeak Bright settings Orbiter settingsINVERSE/WHITE Settings Soft Focus settingsSignal Information Menu Setting Closed CaptionReducing the brightness of Closed Caption External Control Pin Assignments Troubleshooting Symptom Checks RemedyModel Information Important Safety Instructions Avertissment Important Information Avertissement DOC avis de conformationSpecifications  42Wide VGA Supported resolution Computer input signals supported by this systemPage Limited Warranty Plasma Monitors Audio Visual Products