Dukane P42A specifications External Control Pin Assignments

Page 27

External Control

Pin Assignments

Application

These specifications cover the communications control of the plasma monitor by external equipment.

Connections

Connections are made as described below.

External equipment e.g., Personal computer

Display

Connector on the plasma monitor side: EXTERNAL CONTROL connector.

Use a crossed (reverse) cable.

Type of connector: D-Sub 9-pin male

Pin No.	Pin Name	Pin No.	Pin Name
1	No Connection	6	DSR (DCE side ready)
2	RXD (Receive data)	7	RTS (Ready to send)
3	TXD (Transmit data)	8	CTS (Clear to send)
4	DTR (DTE side ready)	9	No connection
5	GND

1 2 3 4 5

6 7 8 9

Communication Parameters

(1)	Communication system	Asynchronous
(2)	Interface	RS-232C
(3)	Baud rate	9600 bps
(4)	Data length	8 bits
(5)	Parity	Odd
(6)	Stop bit	1 bit
(7)	Communication code	Hex

External Control Codes (Reference)

FUNCTION		CODE DATA
Power ON		9FH	80H	60H	4EH	00H	CDH
OFF		9FH 80H 60H 4FH 00H					CEH

Input Switch	Video1 (BNC)	DFH 80H 60H 47H 01H					01H	08H
	Video2 (RCA)	DFH 80H 60H 47H 01H					02H	09H
	Video3 (S-Video)	DFH 80H 60H 47H 01H					03H	0AH
	DVD1/HD1 (RCA)	DFH 80H 60H 47H 01H					05H	0CH
	DVD2/HD2 (BNC)	DFH 80H 60H 47H 01H					06H	0DH
	DVD3/HD3 (DVI)	DFH 80H 60H 47H 01H					0EH	15H
	RGB1 (mini D-sub 15-pin)	DFH 80H 60H 47H 01H					07H	0EH
	RGB2 (5BNC)	DFH 80H 60H 47H 01H					08H	0FH
	RGB3 (DVI)	DFH 80H 60H 47H 01H					0CH	13H

Audio Mute	ON	9FH	80H	60H	3EH	00H	BDH
	OFF	9FH 80H 60H 3FH 00H					BEH

Picture Mode	NORMAL	DFH 80H 60H OAH 01H					01H	CBH
	THEATER 1	DFH 80H 60H OAH 01H					02H	CCH
	THEATER 2	DFH 80H 60H OAH 01H					03H	CDH
	DEFAULT	DFH 80H 60H OAH 01H					04H	CEH
	BRIGHT	DFH 80H 60H OAH 01H					05H	CFH

Screen Mode	STADIUM	DFH 80H 60H 51H 01H					02H	13H
	ZOOM	DFH 80H 60H 51H 01H					03H	14H
	NORMAL	DFH 80H 60H 51H 01H					04H	15H
	ANAMORPHIC	DFH 80H 60H 51H 01H					05H	16H
	14 : 9	DFH 80H 60H 51H 01H					09H	1AH
	2.35 : 1	DFH 80H 60H 51H 01H					0AH	1BH

Auto Picture	ON	DFH 80H 60H 7FH 03H					03H	09H	00H	4DH
	OFF	DFH 80H 60H 7FH 03H					03H	09H	01H	4EH

Cinema Mode ON		DFH 80H 60H C1H 01H					01H	82H
	OFF	DFH	80H	60H	C1H	01H	02H	83H

Note: Contact your local dealer for a full list of the

mini D-Sub 15-pin connector (Analog)

		RGB 1
	5		4	3	2	1
	10		9	8	7	6
	15	14		13	12	11
Pin No.			Signal (Analog)
1	Red
2	Green or sync-on-green
3	Blue
4	No connection
5	Ground
6	Red ground
7	Green ground
8	Blue ground
9	No connection
10	Sync signal ground
11	No connection
12	Bi-directional DATA (SDA)
13	Horizontal sync or Composite sync
14	Vertical sync
15	Data clock

DVI-D 24-pin connector (Digital)

The unit is equipped with a type of connector commonly used for digital.

(This cannot be used for an analog input.) (TMDS can be used for one link only.)

RGB 3

1		2		3		4		5		6		7		8

9		10		11		12		13		14		15		16

		18		19		20		21		22		23
17														24

Pin No.	Signal (Digital)
1	T.M.D.S Data 2 -
2	T.M.D.S Data 2 +
3	T.M.D.S Data 2 Shield

4	No connection
5	No connection
6	DDC Clock
7	DDC Data
8	No connection
9	T.M.D.S Data 1 -
10	T.M.D.S Data 1 +
11	T.M.D.S Data 1 Shield
12	No connection
13	No connection
14	+5V Power
15	Ground
16	Hot Plug Detect
17	T.M.D.S Data 0 -
18	T.M.D.S Data 0 +
19	T.M.D.S Data 0 Shield
20	No connection
21	No connection
22	T.M.D.S Clock Shield
23	T.M.D.S Clock +
24	T.M.D.S Clock -

External Control Codes if needed.	27

Image 27

Contents

Plasma Monitor To avoid damage and prolong operating life PrecautionsPlasma monitor cleaning procedure Important InformationAvertissement Recommandations importantesPrécautions Mises en garde et précautions de sécuritéMéthode de nettoyage du moniteur à plasma Contents Ventilation Requirements for enclosure mounting InstallationCable Management How to use the remote controlBattery Installation and Replacement Handling the remote controlFront View Turns the monitor’s power on and offReceives the signals from the remote control Part Names and FunctionRear View/ Terminal Board Remote Control Basic Operations Wide Operations When viewing videos or digital video discsNormal size screen 43 or Sxga Wide Screen Operation with Computer SignalsWhen wide signals are input Supported resolutionMenu Operations OSM On Screen Menu ControlsMain menu Sub menu Menu Tree Restoring the factory default settings Only when Auto Picture is OFF RGB/PC onlyReducing noise in the picture Picture Settings MenuStoring picture settings Adjusting the pictureChanging the Gamma Curve Setting the color temperatureAdjusting the color to the desired level Making the Low Tone adjustments Cinema Mode Adjusting the pedestal level black levelAdjusting the colors Setting the picture to suit the movieAdjusting the Position, Size, Fine Picture, Picture Adj Audio Settings MenuImage Adjust Settings Menu Setting the allocation of the audio connectorsSET UP Settings Menu Setting the signal and black level for DVI signal Setting the video signal formatSetting the background color when no signal is being input Turning on/off the menu display Setting the screen size for S1/S2 video inputSetting the position of the menu Resetting to the default valuesSetting the Input Skip Function Settings MenuSetting the power management for computer images POWER/STANDBY indicatorSoft Focus settings Peak Bright settingsOrbiter settings INVERSE/WHITE SettingsSignal Information Menu Setting Closed CaptionReducing the brightness of Closed Caption External Control Pin Assignments Symptom Checks Remedy TroubleshootingModel Information Important Safety Instructions Avertissment Important Information DOC avis de conformation AvertissementSpecifications Computer input signals supported by this system 42Wide VGA Supported resolutionPage Limited Warranty Plasma Monitors Audio Visual Products