Dukane P42A specifications OSM On Screen Menu Controls, Menu Operations

Page 14

OSM (On Screen Menu) Controls

Menu Operations

The following describes how to use the menus and the selected items.

1. Press the MENU/ENTER button on the remote control to display the MAIN MENU.

		MAIN MENU
	PICTURE				SET UP
	AUDIO				FUNCTION
	IMAGE ADJ.				SIGNAL INFO.
	SEL.			OK	EXIT EXIT
	SEL.	MENU/ENTER		OK	EXIT EXIT

2. Press the cursor buttons ▲ ▼on the remote control to highlight the menu you wish to enter.

3.Press the MENU/ENTER button on the remote control to select a sub menu or item.

	P I C T U R E
PICTURE MEMORY			: OFF
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT			R				G
NR			:	OFF
COLOR TEMP.			:	MIDDLE
GAMMA			:	2 . 2
LOW TONE			:	AUTO
SET UP LEVEL			:	0%
COLOR TUNE
CINEMA MODE			: ON
PICTURE MODE			: NORMAL
SEL.	ADJ.	MENU/ENTER		OK EXIT RETURN

4.Adjust the level or change the setting of the selected item by using the cursor buttons on the remote control.

CONTRAST

10

5.The adjustments or the settings that are stored in memory. The change is stored until you change it again.

6.Repeat steps 2 –5 to adjust an additional item, or press the EXIT button on the remote control to return to the

main menu.

*When adjusting using the bar at the bottom of the screen, press the or button within 5 seconds. If not, the current setting is set and the previous screen appears.

Note: The main menu disappears by pressing the EXIT button.

14

Image 14

Contents Plasma Monitor Important Information PrecautionsPlasma monitor cleaning procedure To avoid damage and prolong operating lifeMises en garde et précautions de sécurité Recommandations importantesPrécautions AvertissementMéthode de nettoyage du moniteur à plasma Contents Installation Ventilation Requirements for enclosure mountingHandling the remote control How to use the remote controlBattery Installation and Replacement Cable ManagementPart Names and Function Turns the monitor’s power on and offReceives the signals from the remote control Front ViewRear View/ Terminal Board Remote Control Basic Operations When viewing videos or digital video discs Wide Operations Supported resolution Wide Screen Operation with Computer SignalsWhen wide signals are input Normal size screen 43 or SxgaOSM On Screen Menu Controls Menu OperationsMenu Tree Main menu Sub menuOnly when Auto Picture is OFF RGB/PC only Restoring the factory default settingsAdjusting the picture Picture Settings MenuStoring picture settings Reducing noise in the pictureMaking the Low Tone adjustments Setting the color temperatureAdjusting the color to the desired level Changing the Gamma CurveSetting the picture to suit the movie Adjusting the pedestal level black levelAdjusting the colors Cinema ModeSetting the allocation of the audio connectors Audio Settings MenuImage Adjust Settings Menu Adjusting the Position, Size, Fine Picture, Picture AdjSET UP Settings Menu Setting the background color when no signal is being input Setting the signal and black level for DVI signalSetting the video signal format Resetting to the default values Setting the screen size for S1/S2 video inputSetting the position of the menu Turning on/off the menu displayPOWER/STANDBY indicator Function Settings MenuSetting the power management for computer images Setting the Input SkipINVERSE/WHITE Settings Peak Bright settingsOrbiter settings Soft Focus settingsReducing the brightness of Closed Caption Signal Information MenuSetting Closed Caption External Control Pin Assignments Troubleshooting Symptom Checks RemedyModel Information Important Safety Instructions Avertissment Important Information Avertissement DOC avis de conformationSpecifications 42Wide VGA Supported resolution Computer input signals supported by this systemPage Limited Warranty Plasma Monitors Audio Visual Products