Operating
Using the menu function
This projector has the following menus:
INTERACTIVE, PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, NETWORK, SECURITY and EASY MENU.
EASY MENU consists of functions often used, and the other menus are classified into each purpose and brought together as the ADVANCED MENU.
Each of these menus is operated using the same methods. While the projector is displaying any menu, the MENU button on the projector works as the cursor buttons. The basic operations of these menus are as follows.
ENTER button | MENU button |
Cursor buttons | |
POSITION | MENU |
ENTER |
|
| - + - + |
MENU buttons (Cursor buttons)
ESCRESET
ESC button | RESET button |
1. To start the MENU, press the MENU button. The MENU you last used (EASY
or ADVANCED) will appear. EASY MENU has priority to appear just after powered on.
2. In the EASY MENU
(1)Use the ▲/▼ cursor buttons to select an item to operate. If you want to change it to the ADVANCED MENU, select the ADVANCED MENU.
(2)Use the ◄/► cursor buttons to operate the item.
In the ADVANCED MENU
(1)Use the ▲/▼ cursor buttons to select a menu. If you want to change it to the EASY MENU, select the EASY MENU.
The items in the menu appear on the right side.
(2)Press the ► cursor button or ENTER button to move the cursor to the right side. Then use the
▲/▼ cursor buttons to select an item to operate and press the ► cursor button or ENTER button to progress. The operation menu or dialog of the selected item will appear.
(3)Use the buttons as instructed in the OSD to operate the item.
(continued on next page)
29