Dukane 8107HWI user manual Remote Freq, 1NORMAL 2HIGH, Control port

OPTION menu

Item Description

	REMOTE FREQ.
	(1) Use the ▲/▼ button to change the projector's remote sensor
	frequency setting ( 4, 17).
	1:NORMAL 2:HIGH
	(2) Use the ◄/► button to change the
	projector's remote sensor on or off.
	ON OFF
	The factory default setting is for both 1:NORMAL and 2:HIGH to be
	on. If the remote control does not function correctly, disable either of
	them.
	It's not possible to disable both options at the same time.
	Selecting this item displays COMMUNICATION
	menu.
	In this menu, you can configure the serial
SERVICE	communication settings of the projector using the
	CONTROL port.
(continued)

COMMUNICATION • Select an item using the cursor buttons ▲/▼. Then pressing the ► button opens the submenu

for the setting item you selected. Or, pressing the ◄ button instead of the ► button makes the menu back to the previous one without changing the setup. Each submenu can be operated as described above.

•When COMMUNICATION TYPE (63) is set to OFF, the other items in COMMUNICATION menu are invalid.

•For the function of serial communication, refer to the User's Manual - Network Guide.

(continued on next page)

62