Canon 7545 owner manual Computer Input Automatic MULTI-SCAN System, Auto PC Adjustment

Page 23

COMPUTER INPUT

AUTOMATIC MULTI-SCAN SYSTEM

This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA or SXGA (refer to “COMPATIBLE COMPUTER SPECIFICATION” on page 26). When selecting Computer, this projector automatically tunes to incoming signal and projects proper image without any special setting. (Some computers need setting manually.)

Note : Projector may display one of the following messages.

Auto

––––

When projector cannot recognize connected signal as PC PC SYSTEM MENU system provided in this projector, Auto PC Adjustment

function operates to adjust projector and the message “Auto” is displayed on SYSTEM Menu icon.

When image is not provided properly, manual adjustment is required. (Refer to P24 and 25.)

There is no signal input from computer. Make sure the connection of computer and a projector is set correctly. (Refer to TROUBLESHOOTING on page 40.)

PC SYSTEM Menu icon Displays system being selected.

D-VGA, D-SVGA or D-XGA

 

 

 

 

 

When digital computer signal is received on DVI terminal,

PC SYSTEM MENU

above message is displayed on PC SYSTEM Menu icon.

 

SELECT COMPUTER SYSTEM MANUALLY

This projector automatically selects PC system among those provided in this projector and PC system can be also selected manually.

1

Press MENU button and ON-SCREEN MENU will appear. Press

POINT LEFT/RIGHT buttons to move a red frame pointer to PC

 

SYSTEM Menu icon.

2

Press POINT DOWN button to move a red arrow pointer to the

 

system that you want to set, and then press SET button.

PC SYSTEM Menu icon Displays system being selected.

The systems on this dialog box can be selected.

Custom Mode (1~5) set in PC ADJUST Menu. (P24, 25)

PC ADJUSTMENT

AUTO PC ADJUSTMENT

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots and Picture Position to conform to your computer. Auto PC Adjustment function can be operated as follows.

Auto PC Adj.

PC ADJUST MENU

 

1

Press MENU button and ON-SCREEN MENU will appear. Press

POINT LEFT/RIGHT button to move a red frame pointer to PC

 

ADJUST Menu icon.

2

Press POINT DOWN button to move a red frame pointer to

AUTO PC Adj. icon and then press SET button twice.

This Auto PC Adjustment can be also executed by pressing AUTO PC ADJ. button on Remote Control Unit.

Store adjustment parameters.

Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once parameters are memorized, setting can be done just by selecting Mode in PC SYSTEM Menu (P23). Refer to step 3 of MANUAL PC ADJUSTMENT section (P25).

NOTE

PC ADJUST Menu icon

Move a red frame pointer to AUTO PC Adj. icon and press SET button.

Fine sync, Total dots and Picture Position of some computers can not be fully adjusted with this Auto PC Adjustment function. When the image is not provided properly through this function, manual adjustments are required. (Refer to page 24, 25.)

Auto PC Adjustment function cannot be operated in Digital Signal input on DVI terminal and “RGB”, “720p (HDTV)”, “1035i (HDTV)” or “1080i (HDTV)” is selected on PC SYSTEM Menu.

23

Image 23
Contents LV-7545 To the Owner Voor de klanten in Nederland Safety InstructionsFederal Communication Commission Notice CompliancesTable of Contents Compact Design Motor-driven Lens Shift Features and DesignName of Each Part of Projector PreparationFor Continental Europe SETTING-UP ProjectorConnecting AC Power Cord Room Light Preparation Positioning ProjectorMoving Projector Preparation Adjustable FeetAudio Input Jacks Connecting ProjectorUSB Connector Series B Terminals of ProjectorTerminals Projector Connecting to ComputerAudio Video Connecting to Video EquipmentLaser Pointer Function Operation of Remote ControlBefore Operation Focus Button Volume ButtonWired Remote Jack Zoom ButtonReady Indicator TOP Controls and IndicatorsFlow of ON-SCREEN Menu Operation HOW to Operate ON-SCREEN MenuOperating ON-SCREEN Menu Sound Menu Before Operation Menu BARGuide Window Turning OFF Projector Basic OperationTurning on / OFF Projector Turning on ProjectorKeystone Adjustment Adjusting ScreenZoom Adjustment Lens Shift AdjustmentSound Adjustment Input Computer InputSelecting Input Source Selecting Computer SystemSelect Computer System Manually PC AdjustmentAuto PC Adjustment Computer Input Automatic MULTI-SCAN SystemPC Adjust Menu Computer Input Manual PC AdjustmentFull screen Display areaDisplay area H 1024 x 48.363 60.004 Computer Input Compatible Computer SpecificationsResolution 640 x 31.469 59.940Image Select Menu Picture Image AdjustmentsImage Level Select Direct Image Level Select MenuImage Adjust Menu Computer Input Image Level AdjustmentScreen Menu Picture Screen AdjustmentVideo Video InputAV System Menu Video or S-VIDEO Component Video Signal FormatSelecting Video System PAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-NCinema Video Input Image Level Adjustment Provides image at a normal video aspect ratio of 4 Setting Menu SettingTo change the code of Projector To change the code of the Remote Control UnitOperating Wireless Mouse SETTING/APPENDIXOperating Wireless Mouse InstallationCleaning Projection Lens MaintenanceAIR Filter Care and Cleaning Lamp Replace Counter Appendix Lamp ReplacementTroubleshooting Function does not Remote Control UnitWireless Mouse Does not workOptional Parts Technical SpecificationsUSB Connector Series B Appendix Configurations of the TerminalsCanon CANADA, INC