PREPARATION
ADJUSTABLE FEET
Picture tilt and projection angle can be adjusted by rotating the ADJUSTABLE FEET. Projection angle can be adjusted to 10.5 degrees.
1 | Lift the front of the projector and pull the FEET LOCK |
| LATCHES on both sides of the projector. |
2 | Release the FEET LOCK LATCHES to lock the |
| ADJUSTABLE FEET and rotate the ADJUSTABLE FEET |
| to fine tune the position and the tilt. |
3 | To shorten the ADJUSTABLE FEET, lift the front of the |
| projector and pull and undo the FEET LOCK LATCHES. |
The position and the keystone distortion of the image can be adjusted using the Menu Operation. (Refer to P 20 and 35.)
ADJUSTABLE FEET | FEET LOCK |
| LATCHES |
MOVING PROJECTOR
Use the Carry Handle when moving a Projector.
When moving a projector, replace the lens cover and retract the feet to prevent damage to the lens and cabinet.
When a projector is not in use for an extended period, put it into the case (dust cover) supplied with a projector.
CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR
●Do not drop or bump a projector, otherwise damages or malfunctions may result.
●When carrying a projector, use a suitable carrying case.
●Do not transport a projector by using a courier or transport service in an unsuitable transport case. This may cause damage to a projector. To transport a projector through a courier or transport service, consult your dealer for best way.
10