VIDEO INPUT
IMAGE LEVEL ADJUSTMENT
1 | Press MENU button and |
POINT LEFT/RIGHT button(s) to move a red frame pointer to | |
| IMAGE ADJUST Menu icon. |
2 | Press POINT DOWN button to move a red frame pointer to the |
item that you want to adjust and then press SET button. The |
level of each item is displayed. Adjust each level by pressing POINT LEFT/RIGHT button(s).
Contrast
Press POINT LEFT button to decrease contrast, and POINT RIGHT button to increase contrast. (From 0 to 63.)
Brightness
Press POINT LEFT button to adjust image darker, and POINT RIGHT button to adjust brighter. (From 0 to 63.)
Color
Press POINT LEFT button to lighten color, and POINT RIGHT button to deeper color. (From 0 to 63.)
IMAGE ADJUST MENU
Move a red frame pointer to the item to be selected and then press SET button.
IMAGE ADJUST Menu icon
Tint
Press POINT LEFT button or POINT RIGHT button to obtain proper color. (From 0 to 63.)
White balance (Red)
Press POINT LEFT button to lighten red tone and POINT RIGHT button to deeper tone. (From 0 to 63.)
White balance (Green)
Press POINT LEFT button to lighten green tone and POINT RIGHT button to deeper tone. (From 0 to 63.)
White balance (Blue)
Press POINT LEFT button to lighten blue tone and POINT RIGHT button to deeper tone. (From 0 to 63.)
Sharpness
Press POINT LEFT button to soften the image, and POINT RIGHT button to sharpen the image. (From 0 to 31.)
Gamma
Press either POINT LEFT button or POINT RIGHT button to obtain better balance of contrast. (From 0 to 15.)
Noise reduction
Press POINT LEFT/RIGHT button(s) to change noise reduction mode. Dialog box display is changed to “On to reduce noise (rough parts) of image. Press POINT LEFT/RIGHT button(s) again, to change noise reduction mode to off.
Progressive scan
Press POINT LEFT/RIGHT button(s) to change progressive scan mode. Dialog box display is changed to “Off” and progressive scan mode to off. Press POINT LEFT/RIGHT button(s) again, progressive scan mode to on.
Press POINT LEFT/RIGHT buttons to adjust value.
Press SET button at this icon to dis-
play other items.
Press SET button at this icon to dis- play previous items.
Press POINT LEFT/RIGHT buttons to adjust value.
Press SET button at this icon to store the value.
NOTE :
Tint cannot be adjusted when the video system is PAL, SECAM,
Noise Reduction cannot be operated when the video signal types and systems as follow.
●Composite video signal (SECAM, NTSC4.43,
●
●Component video signal.
Progressive cannot be operated when “480p”, “575p”, “720p”, “1035i” or “1080i” is selected on AV SYSTEM MENU (P31).
33