Dymo M1011 manual Applying Self-Adhesive Labels, To apply self-adhesive labels

Page 11

Applying Self-Adhesive Labels

Self-adhesive plastic and aluminum labels stick permanently to any smooth, clean, and dry surface.

To apply self-adhesive labels

1.Peel off the protective backing taking care not to touch the adhesive.

2.Press the label in place.

3.Apply firm pressure along the entire length to ensure good contact.

11

Image 11

Contents User Guide Page About Your New Labelmaker To load the tape roll Loading the Label TapeTo cut the tape Cutting the TapeTo add space between words Embossing the LabelTo emboss a label Embossing on Stainless Steel Tape To adjust for stainless steel tapeTo retract the tape Retracting the TapeTo remove the tape Removing the TapeTo center the text on a short label Centering the Text on the LabelTo center the text on a long label To apply self-adhesive labels Applying Self-Adhesive LabelsTo punch a cable tie slot Punching Holes in Non-Adhesive LabelsTo punch a hole To change the wheel Changing the WheelHints for Trouble Free Operation Contacting Customer Support Warranty Registration