Dymo M1011 manual Removing the Tape, To remove the tape

Page 9

A

Removing the Tape

To remove the tape

1.Retract the tape as described in “Retracting the Tape” on page 8.

2.Open the tape cassette door (A) and remove the tape.

Use caution when removing stainless steel tape that may have sharp edges.

3.Reload the tape as described in “Loading the Label Tape” on page 4.

9

Image 9
Contents User Guide Page About Your New Labelmaker To load the tape roll Loading the Label TapeTo cut the tape Cutting the TapeEmbossing the Label To emboss a labelTo add space between words Embossing on Stainless Steel Tape To adjust for stainless steel tapeTo retract the tape Retracting the TapeTo remove the tape Removing the TapeCentering the Text on the Label To center the text on a long labelTo center the text on a short label To apply self-adhesive labels Applying Self-Adhesive LabelsPunching Holes in Non-Adhesive Labels To punch a holeTo punch a cable tie slot To change the wheel Changing the WheelHints for Trouble Free Operation Contacting Customer Support Warranty Registration