Dymo M1011 manual Embossing the Label, To emboss a label, To add space between words

F

H

G

Embossing the Label

Avoid turning the embossing wheel at the same time you are squeezing the embossing handle. This can damage the character blades.

To emboss a label

1.Turn the character selection wheel (G) until the desired letter is centered in the window (H).

2.Squeeze the embossing handle (F) firmly.

3.Release the embossing handle fully before selecting the next character.

To add space between words

‹Squeeze embossing handle (F) half-way (one click) or turn the tape advance knob clockwise (one click per space).

6