Dymo M1011 manual Embossing on Stainless Steel Tape, To adjust for stainless steel tape

Page 7

Embossing on Stainless Steel Tape

You may need to adjust the labelmaker to emboss properly when using stainless steel tape.

1.Turn the adjustment screw (J) clockwise 1/2 to 3/4 turn.

2.Emboss the text as described in “Embossing the Label” on page 6.

When you return to using plastic or aluminum tape, you may need to reverse this adjustment.

Image 7

Contents User Guide Page About Your New Labelmaker To load the tape roll Loading the Label TapeTo cut the tape Cutting the TapeTo emboss a label Embossing the LabelTo add space between words Embossing on Stainless Steel Tape To adjust for stainless steel tapeTo retract the tape Retracting the TapeTo remove the tape Removing the TapeTo center the text on a long label Centering the Text on the LabelTo center the text on a short label To apply self-adhesive labels Applying Self-Adhesive LabelsTo punch a hole Punching Holes in Non-Adhesive LabelsTo punch a cable tie slot To change the wheel Changing the WheelHints for Trouble Free Operation Contacting Customer Support Warranty Registration