Dymo M1011 manual Changing the Wheel, To change the wheel

Page 13

Changing the Wheel

You can replace the character wheel with a Reverse Image Wheel.

1.Remove the label tape.

2.Unscrew the screw in the center of the embossing wheel (G) and remove the wheel.

3.Position the new wheel.

4.Insert the screw in the center and tighten. Do not tighten the screw too tightly.

Image 13

Contents User Guide Page About Your New Labelmaker To load the tape roll Loading the Label TapeTo cut the tape Cutting the TapeTo emboss a label Embossing the LabelTo add space between words Embossing on Stainless Steel Tape To adjust for stainless steel tapeTo retract the tape Retracting the TapeTo remove the tape Removing the TapeTo center the text on a long label Centering the Text on the LabelTo center the text on a short label To apply self-adhesive labels Applying Self-Adhesive LabelsTo punch a hole Punching Holes in Non-Adhesive LabelsTo punch a cable tie slot To change the wheel Changing the WheelHints for Trouble Free Operation Contacting Customer Support Warranty Registration