Delta Electronics SS1-UM-1.05 Using a PC instead of the Workabout, Starting the PC software

Page 16

Using a PC instead of the Workabout

Starting the PC software

Skip this section if you are using the Psion. Refer to the section in Getting Started for details on starting the PC version of the SunData software. This should bring you to the PC title screen. You will then set the probe into its emulator mode for the first part of the tutorial, as follows:

♦Press Alt+S to drop down the Settings menu as shown.

♦Move to the SunScan Probe option using the ↑↓↓ arrow keys, and accept it by pressing

Enter or ↵

The SunScan Probe dialog box will appear.

♦ Use the Tab or ↑↓↓ keys to highlight the Data from field.

♦Use the ←→ → keys to toggle between the options in the field

♦Select the Emulator option

♦Move to the External Sensor field, select the BFS option (it will be emulated too)

♦Move to the <OK> field and press

Enter or ↵

The menu line at the bottom of the screen will now show only the CONTINUE option.

♦Press Enter or ↵ to get the following screen:

In the Setting up instructions that follow, you must interpret the Psion Workabout instructions appropriately for your PC's environment. Don't forget the general rules:

a)Select an option by moving the highlighted cursor to it. Use the arrow keys or the Tab key to move between options. Half-tone highlights indicate that options are not available at that moment.

b)Accept the selected option by pressing ↵ or Return or Enter

c)Escape from, or cancel, a selection by pressing Esc

Menus at the top of the screen can be selected by pressing Alt and the highlighted letter key (or moving the cursor to it with the arrow keys), otherwise the options at the bottom of the screen are selected.

16 • SunScan Tutorial

Document code: SS1-UM-1.05

Page 15 Page 17
Image 16
Page 15 Page 17
Contents SunScan SS1-UM-1.05Copyright AcknowledgementsTrademarks CE conformityContents Menus and Screens More Psion and file handling notes Measurement optionsLAI theory Technical Reference sectionAppendices IndexHow to use the manuals IntroductionSunScan Canopy Analysis System Organisation of this manualField accessories SunScan probeBeam Fraction sensor Data Collection TerminalPreliminary checks Getting StartedWorkabout and SunScan probe Checking the Workabout hardware Installing the SunData s/w in your PC Installing the s/wSunData s/w Diskette What the s/w doesSetting up your PCs COM port Running SunDataSunScan probe to PC Communication checksWorkabout to PC Running SunData in Windows About this tutorial SunScan TutorialWorking with the Workabout What to do if you get lost Starting SunData in the WorkaboutUsing a PC instead of the Workabout Starting the PC softwareThis page is intentionally blank Setting up a measurement session Working through the menu optionsFile Saving Hot KeysUsing the Emulator mode Taking readingsConnecting the SunScan probe Without a Beam Fraction SensorConnecting the Beam Fraction Sensor Measuring Leaf Area Index without a Beam Fraction Sensor Reviewing your data file AveragesFrom the Workabout Transferring the data file to your PCTo the PC Initiating the file transfer from the Workabout Meanwhile, on the PC RS232 communication problems Conclusion of the TutorialSunData Screens on the Workabout Menus and Screens SettingsFile Contd UtilsQuit More Psion and file handling notes Navigating Psion directories and screensWorkabout User Guide Navigating the Psion directories and screensPsion subdirectory usage in file select dialogs Deleting unwanted Workabout files Re-installing the SunData application iconFlashcards reformatting SunData Configuration files Configuration and data file handlingData memory management Default .cfg Creating a configuration fileRestoring a configuration Data files.PRN file Displaying data files on your PC.CSV file Data file layouts and data groups Page Experiment design Measurement optionsAbove-canopy reference requirements Canopy type and BFS practicalities Canopy Sampling volumeCanopy type and LAI estimates Preferred light and weather conditions Planning for the sun’s positionSetting Eladp Advice on Absorption and Eladp valuesAbsorption Relationship between Mean Leaf Angle and Eladp Estimating Eladp in the fieldSunScan System Measurement modes Workabout setupLAI, PAR and All displays Autolog function Measurement procedures in the field Probe handling in the fieldProbe GO button Levelling the probeUsing the tripod BFS handling in the fieldUse of the tripod WorkaboutLevelling the BFS Finding North, and setting the shade ringExtension cables, and the location of the BFS PAR calibrations Factory light calibrationChecking the probe/BFS matching Recalibrate optionRoutine maintenance and cleaning Restoring the factory calibrationEffect of the shade ring on the BFS Comparing the calibration with other PAR sensorsEnvironmental and moisture protection SunScan probe and Beam Fraction SensorLAI theory Ingredients of the LAI computation methodMajor assumptions Derivation of Wood’s SunScan canopy analysis equationsTheory versus reality Campbells Ellipsoidal LAD equations Beers law for canopy absorptionTransmission of Diffuse Light Transmission fraction τ Is given by I/I0 Modelling the canopy transmission Diffuse light transmission cosine corrected sensorDetail Functions used to model canopy transmission Accuracy of LAI calculationsDiffuse light cosine response sensor Diffuse light hemispherical response sensorModelling incomplete PAR absorption and scattering Exp 0.1 . x . atan 0.9 Atan L Q SpherCalculating zenith angles Scientific referencesSummary Jones, Hamlyn G Plants and Microclimate second edition. CUP Maintenance and repair Technical Reference sectionChecking the batteries SunScan probe batteriesChecking the desiccant Checking the PAR calibration Re-setting the factory calibrationFactory calibration method Troubleshooting Problems running the SunData applicationPsion Workabout While running SunDataInsufficient power to write data reported Technical Support Specifications SunScan Probe Type SS1Beam Fraction Sensor type BF1 Data Collection Terminal type DCT1 Psion WorkaboutCarrying Case type SCC1 Telescopic Tripod type BFT1Spares Kit type SPS1 Logging CablesPAR Performance Spectral responseCosine responses of probe and BFS SunScan system cosine responseAppendices Logging the probe as a Linear Quantum SensorLogging the Beam Fraction sensor Upgrading the SunScan system SunData PC s/wWorkabout SunData s/w Revision HistoryFile transfer between Workabout and PC Choice of different programsPsiWin Workabout Remote LinkExample using Slink Slink and RcomDrives on the PC are referred to as REMA, Remc REM = remote Example using Rcom Documentation of Rcom and SlinkUsing the Workabout Comms application Alternative file transfer mechanismsSending a file to a Communication program Sending a file to a serial printerGlossary Page Index AccuracyIndex Field use 39, 46, 48, 50, 51, 58

SS1-UM-1.05 specifications

Delta Electronics has long been recognized for its innovative solutions in power and thermal management technologies. One of its notable products is the SS1-UM-1.05, a compact and efficient power supply module designed to meet the needs of a variety of applications, from industrial automation to telecommunications.

The Delta SS1-UM-1.05 is a key component in the company’s extensive portfolio, providing reliable and stable power supply for both demanding and sensitive electronic equipment. One of the main features of this module is its high efficiency, which typically exceeds 90%. This not only minimizes energy consumption but also reduces heat generation, making it an ideal choice for applications where thermal management is crucial.

Another significant characteristic of the SS1-UM-1.05 is its wide input voltage range, which allows it to operate effectively in various environments. The module supports a voltage range from 90 to 264 VAC, ensuring consistent performance even in fluctuating supply conditions. This versatility makes it well-suited for global applications, accommodating different electrical standards and requirements.

The SS1-UM-1.05 also boasts a compact footprint, which is essential for space-constrained installations. Its design emphasizes not only performance but also ease of integration into existing systems. The module provides multiple output voltage options, allowing it to cater to specific power requirements, whether it be for industrial machinery or consumer electronics.

In terms of technologies, the SS1-UM-1.05 incorporates advanced power conversion technologies that enhance its overall performance. It features overload protection and thermal shutdown mechanisms to safeguard both the module and the equipment it powers from potential damages due to electrical faults. Moreover, it has low electromagnetic interference (EMI) emissions, which is crucial for environments sensitive to electrical noise.

The SS1-UM-1.05 is also designed with a robust enclosure that adheres to stringent safety and environmental standards. This enhances its durability and reliability, ensuring it can withstand harsh operating conditions. With these features, Delta Electronics demonstrates its commitment to delivering high-quality products that meet the evolving needs of industries worldwide.

Overall, the Delta SS1-UM-1.05 power supply module is an exemplary solution for those seeking a reliable, efficient, and compact power source. Its advanced features and technologies make it an indispensable component in modern electronic systems.
Top Page Image Contents