D. File transfer between Workabout and PC
Choice of different programs
For the transfer of data files from the Workabout to a PC, the SunData software that resides in the Workabout and on your PC provides all you need, but it is specific for this purpose. There are other occasions however when you may want to transfer other files between the PC and the Workabout, for example to send an upgraded version of the SunData.app file to the Workabout.
To do this, there are three routes. We provide two DOS utility programs from Psion plc on the SunData diskette called SLINK and RCOM. The main difference between these programs is that RCOM is operated from your PC keyboard with
If you are familiar with the Workabout's screens then you will probably find SLINK is the easiest route to master quickly.
In addition, we offer as an option the Psion PsiWin program for Windows, which is an excellent application program for handling communications between PCs and various computers in the Psion range. Contact your agent or
The Workabout Remote Link
We give you below some notes on using each of these programs. In every case you must set the Workabout's Remote Link on. Access this from the Psion System screen with ∪ +L, or press Menu, Spec, Remote Link, Enter.
Warning! Don't forget to turn the Remote Link off when you have finished. If you neglect this, you will get a "Failed to open Serial Port In use" message when you next try to run SunData in the Workabout.
PsiWin
PsiWin is a well documented program with a full User Manual and
♦Install and run PsiWin on your PC.
♦Connect the Workabout to your PC COM port with the SunScan RS232 comms cable.
♦On your Workabout, exit from the SunData program if necessary (∪ +X). Access the Remote Link dialog (∪ +L) and set the link on, port A and with 19200 Baud.
In PsiWin:
The Setup, Communications... menu deals with COM ports and serial data parameters. Check that they correspond exactly with those of the Workabout remote link.
The Setup, Conversions... menu deals with file conversions. This is not needed for any file transfer. Make sure Conversion is Off.
Window, Refresh is worth doing when verifying that a file has been transferred to a new drive or directory.
SunScan User Manual v 1.05 | Appendices • 77 |