Delta Electronics SS1-UM-1.05 user manual PAR Performance, Spectral response

Page 72

PAR Performance

The graphs below show the actual spectral and cosine response curves for the SunScan system.

Spectral response

The spectral response curve shows that the SunScan response is almost entirely within the PAR wavelength band of 400 nm - 700 nm. The GaAsP sensors used have an increased sensitivity towards the red end of the spectrum, but this is compensated for by the sharp cut-off at 670 nm. In practice, we have found that these sensors read to within a few percent of an accurate PAR sensor in natural daylight conditions above or within the canopy. However, if you are working under artificial or strongly coloured light you should check the SunScan readings against an accurate PAR sensor if you need to know absolute PAR levels.

Spectral response

SunScan

Ideal

 

160

 

 

 

 

 

 

 

 

 

140

 

 

 

 

 

 

 

 

%

120

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

response

100

 

 

 

 

 

 

 

 

80

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

relative

60

 

 

 

 

 

 

 

 

40

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

20

 

 

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

 

 

350

400

450

500

550

600

650

700

750

wavelength nm

72 • Technical Reference section

Document code: SS1-UM-1.05

Page 71 Page 73
Image 72
Page 71 Page 73
Contents SunScan SS1-UM-1.05Copyright AcknowledgementsTrademarks CE conformityContents Menus and Screens More Psion and file handling notes Measurement optionsLAI theory Technical Reference sectionAppendices IndexHow to use the manuals IntroductionSunScan Canopy Analysis System Organisation of this manualField accessories SunScan probeBeam Fraction sensor Data Collection TerminalGetting Started Preliminary checksWorkabout and SunScan probe Checking the Workabout hardware Installing the SunData s/w in your PC Installing the s/wSunData s/w Diskette What the s/w doesSetting up your PCs COM port Running SunDataCommunication checks SunScan probe to PCWorkabout to PC Running SunData in Windows SunScan Tutorial About this tutorialWorking with the Workabout What to do if you get lost Starting SunData in the WorkaboutUsing a PC instead of the Workabout Starting the PC softwareThis page is intentionally blank Setting up a measurement session Working through the menu optionsFile Saving Hot KeysUsing the Emulator mode Taking readingsConnecting the SunScan probe Without a Beam Fraction SensorConnecting the Beam Fraction Sensor Measuring Leaf Area Index without a Beam Fraction Sensor Reviewing your data file AveragesTransferring the data file to your PC From the WorkaboutTo the PC Initiating the file transfer from the Workabout Meanwhile, on the PC RS232 communication problems Conclusion of the TutorialSunData Screens on the Workabout Settings Menus and ScreensFile Contd UtilsQuit More Psion and file handling notes Navigating Psion directories and screensWorkabout User Guide Navigating the Psion directories and screensPsion subdirectory usage in file select dialogs Re-installing the SunData application icon Deleting unwanted Workabout filesFlashcards reformatting Configuration and data file handling SunData Configuration filesData memory management Default .cfg Creating a configuration fileRestoring a configuration Data filesDisplaying data files on your PC .PRN file.CSV file Data file layouts and data groups Page Measurement options Experiment designAbove-canopy reference requirements Canopy Sampling volume Canopy type and BFS practicalitiesCanopy type and LAI estimates Preferred light and weather conditions Planning for the sun’s positionAdvice on Absorption and Eladp values Setting EladpAbsorption Relationship between Mean Leaf Angle and Eladp Estimating Eladp in the fieldWorkabout setup SunScan System Measurement modesLAI, PAR and All displays Autolog function Measurement procedures in the field Probe handling in the fieldProbe GO button Levelling the probeUsing the tripod BFS handling in the fieldUse of the tripod WorkaboutFinding North, and setting the shade ring Levelling the BFSExtension cables, and the location of the BFS PAR calibrations Factory light calibrationChecking the probe/BFS matching Recalibrate optionRoutine maintenance and cleaning Restoring the factory calibrationEffect of the shade ring on the BFS Comparing the calibration with other PAR sensorsEnvironmental and moisture protection SunScan probe and Beam Fraction SensorLAI theory Ingredients of the LAI computation methodDerivation of Wood’s SunScan canopy analysis equations Major assumptionsTheory versus reality Beers law for canopy absorption Campbells Ellipsoidal LAD equationsTransmission of Diffuse Light Transmission fraction τ Is given by I/I0 Modelling the canopy transmission Diffuse light transmission cosine corrected sensorDetail Functions used to model canopy transmission Accuracy of LAI calculationsDiffuse light cosine response sensor Diffuse light hemispherical response sensorModelling incomplete PAR absorption and scattering Exp 0.1 . x . atan 0.9 Atan L Q SpherScientific references Calculating zenith anglesSummary Jones, Hamlyn G Plants and Microclimate second edition. CUP Maintenance and repair Technical Reference sectionChecking the batteries SunScan probe batteriesChecking the desiccant Re-setting the factory calibration Checking the PAR calibrationFactory calibration method Troubleshooting Problems running the SunData applicationPsion Workabout While running SunDataInsufficient power to write data reported Technical Support Specifications SunScan Probe Type SS1Beam Fraction Sensor type BF1 Data Collection Terminal type DCT1 Psion WorkaboutCarrying Case type SCC1 Telescopic Tripod type BFT1Spares Kit type SPS1 Logging CablesPAR Performance Spectral responseCosine responses of probe and BFS SunScan system cosine responseAppendices Logging the probe as a Linear Quantum SensorLogging the Beam Fraction sensor Upgrading the SunScan system SunData PC s/wWorkabout SunData s/w Revision HistoryFile transfer between Workabout and PC Choice of different programsPsiWin Workabout Remote LinkExample using Slink Slink and RcomDrives on the PC are referred to as REMA, Remc REM = remote Example using Rcom Documentation of Rcom and SlinkUsing the Workabout Comms application Alternative file transfer mechanismsSending a file to a Communication program Sending a file to a serial printerGlossary Page Index AccuracyIndex Field use 39, 46, 48, 50, 51, 58

SS1-UM-1.05 specifications

Delta Electronics has long been recognized for its innovative solutions in power and thermal management technologies. One of its notable products is the SS1-UM-1.05, a compact and efficient power supply module designed to meet the needs of a variety of applications, from industrial automation to telecommunications.

The Delta SS1-UM-1.05 is a key component in the company’s extensive portfolio, providing reliable and stable power supply for both demanding and sensitive electronic equipment. One of the main features of this module is its high efficiency, which typically exceeds 90%. This not only minimizes energy consumption but also reduces heat generation, making it an ideal choice for applications where thermal management is crucial.

Another significant characteristic of the SS1-UM-1.05 is its wide input voltage range, which allows it to operate effectively in various environments. The module supports a voltage range from 90 to 264 VAC, ensuring consistent performance even in fluctuating supply conditions. This versatility makes it well-suited for global applications, accommodating different electrical standards and requirements.

The SS1-UM-1.05 also boasts a compact footprint, which is essential for space-constrained installations. Its design emphasizes not only performance but also ease of integration into existing systems. The module provides multiple output voltage options, allowing it to cater to specific power requirements, whether it be for industrial machinery or consumer electronics.

In terms of technologies, the SS1-UM-1.05 incorporates advanced power conversion technologies that enhance its overall performance. It features overload protection and thermal shutdown mechanisms to safeguard both the module and the equipment it powers from potential damages due to electrical faults. Moreover, it has low electromagnetic interference (EMI) emissions, which is crucial for environments sensitive to electrical noise.

The SS1-UM-1.05 is also designed with a robust enclosure that adheres to stringent safety and environmental standards. This enhances its durability and reliability, ensuring it can withstand harsh operating conditions. With these features, Delta Electronics demonstrates its commitment to delivering high-quality products that meet the evolving needs of industries worldwide.

Overall, the Delta SS1-UM-1.05 power supply module is an exemplary solution for those seeking a reliable, efficient, and compact power source. Its advanced features and technologies make it an indispensable component in modern electronic systems.
Top Page Image Contents