Compaq SMA200 user manual For Your Safety, RoHS Commitment

Page 8

DIGITAL-LOGIC AG

SMA200 Manual V1.0

￿Smart Battery Data Specification Revision 1.1, December 11, 1998. www.sbs-forum.org

￿System Management Bus (SMBus) Specification Version 2.0, August 3, 2000 Copyright © 1994, 1995, 1998, 2000 Duracell, Inc., Energizer Power Systems, Inc., Fujitsu, Ltd., Intel Corporation, Linear Technology Inc., Maxim Integrated Products, Mitsubishi Electric Semiconductor Company, Power- Smart, Inc., Toshiba Battery Co. Ltd., Unitrode Corporation, USAR Systems, Inc. All rights reserved. http://www.smbus.org/

￿Universal Serial Bus Specification Revision 2.0, April 27, 2000 Copyright © 2000 Compaq Computer Corporation, Hewlett-Packard Company, Intel Corporation, Lucent Technologies Inc., Microsoft Corporation, NEC Corporation, Koninklijke Philips Electronics N.V. All rights reserved. http://www.usb.org/

1.10. For Your Safety

Your new DIGITAL-LOGIC product was developed and tested carefully to provide all features necessary to ensure its compliance with electrical safety requirements. It was also designed for a long, fault-free life. However, this life expectancy can be drastically reduced by improper treatment during unpacking and installation. Therefore, in the interest of your own safety and for the correct operation of your new DIGITAL-LOGIC product, please comply with the following guidelines.

Attention!

All work on this device must only be carried out by sufficiently skilled personnel.

Caution, Electric Shock!

Before installing your new DIGITAL-LOGIC product, always ensure that your mains power is switched off. This applies also to the installation of piggybacks or peripherals. Serious electrical shock hazards can exist during all installation, repair and maintenance operations with this product. Therefore, always unplug the power cable and any other cables which provide external voltage before performing work.

Warning, ESD Sensitive Device!

Electronic boards and their components are sensitive to static electricity. In order to ensure product integrity at all times, be careful during all handling and examinations of this product.

1.11. RoHS Commitment

DIGITAL-LOGIC AG is committed to develop and produce environmentally friendly products according to the Restriction of Hazardous Substances (RoHS) Directive (2002/95/EC) and the Waste Electrical and Electronic Equipment (WEEE) Directive (2002/96/EC) established by the European Union. The RoHS directive was adopted in February 2003 by the European Union and came into effect on July 1, 2006. It is not a law but a directive, which restricts the use of six hazardous materials in the manufacturing of various types of electronic and electrical equipment. It is closely linked with the Waste Electrical and Electronic Equipment Directive (WEEE) 2002/96/EC, which has set targets for collection, recycling and recovery of electrical goods and is part of a legislative initiative to solve the problem of huge amounts of toxic e-waste.

Each European Union member state is adopting its own enforcement and implementation policies using the directive as a guide. Therefore, there could be as many different versions of the law as there are states in the EU. Additionally, non-EU countries like China, Japan, or states in the U.S. such as California may have their own regulations for green products, which are similar, but not identical, to the RoHS directive.

8

Image 8
Contents SmartCore Express SMA200 Initial Version About this Manual and How to Use ItSMA200 Manual Table of Contents Preface TrademarksDisclaimer Environmental Protection StatementTechnical Support Limited Two Year WarrantyRecycling Information Explanation of Symbols CE ConformityApplicable Documents and Standards For Your Safety RoHS CommitmentWeee Application RoHS Compatible Product DesignRoHS Compliant Production Process Swiss Quality Swiss Association for Quality and Management SystemsStandard Features OverviewTechnical Specifications SpecificationIntel US15W Graphics Memory Controller Hub Specification Mathematics CoprocessorIntel US15W Specification Reset & Power Management SpecificationPower Supply Specification Physical Characteristics SpecificationOperating Environment Specification EMI / EMC IEC1131-2 refer MIL 461/462 SpecificationOptions/Accessories Examples of Ordering CodesDimensions & Diagrams Block DiagramDimensions of the smartCoreExpress Module Design in with the smartModuleConnector Placement & Pin Definition on the Carrier Board Photo of the Top Side of the PCB Dimensions of the Carrier Board Connector Component Heights between Module and Carrier BoardSignal Description COM-EXPRESS Connector DescriptionSignal Terminology Descriptions SmartCoreExpress Connector Pinout BUS on the smartCoreExpress Connectors a / B Pins SignalType Remarks Pin Signal Type RemarksSignal BUS Type TypeSignal Descriptions of the Smartcoreexpress Placing an AC Coupling Capacitor on each PCIe-TX SmartCoreExpress Signal Groups PCI-ExpressSdvo Supported devicesLvdsclk + Lvdsvdden Lvdsbklctl Lvdsbklen Lvdsctlaclk LvdsLvdsddcclk Lvdsddcdat USB On Module Ext. Ter Max MatchedUSB Remarks EMV/EMI-filtersParallel ATA Remarks EMV/EMI filtersLpcserirq LPC BUSLPCFRAME# SMBus SMBALERT# CmosSmbdata Cmos Smbclock CmosSupported Codecs EMV/EMI filters If the signals are not used RemarksHDA Audio Interface If the signals are not used Remarks EMV/EMI filters SD / Sdio InterfaceSPI BUS Spimiso Spimosi Spiclk SPICS# CmosSata Interface Option Glan Glantx + Glanrx + GLAN-CLK +LCI Lcirst LCICanrx Cmos Can / SerialCantx Cmos 14. PM Supply Vccrtc PWR PWR PWRSMARTCORE-EXPRESS Connector Specifications Parameter Condition SpecificationSource on smartCore Part Name Part Number Tyco / AMPSMARTCORE-EXPRESS Versus Comexpress Coprocessor Design Dimensions Index