|
| SMA200 Manual V1.0 |
|
|
|
| Intel US15W | Specification |
| PCIe BUS | 2x x1 Lane |
| EIDE BUS | 1x Ultra |
| SATA BUS | - |
| USB V2.0 | 8 channel USB |
| APIC | INTEL I/O APIC |
| SMB | V2.0 SMBus controller |
| FWH | FirmWare Hub for BIOS devices |
| LPC | Serialized BUS (no ISA) used for external SuperI/O |
| Sound | AC97 2.3 HDA Interface with 192kHz sampling rate and 8 channels |
| IRQ Controller | 8259 compatible |
| Timers | 8254 compatible |
| Power Management | Integrated |
Reset & Power Management
Specification
Controller | Atmel |
Power Modes | S5, S3 |
ACPI | V3.0 |
BUS
LPC
PCIexpress
Specification
8bit 33MHz
2x x1 lane
Power Supply | Specification |
DC Input | 5.0V, max. 200mV ripple |
Inrush Current | 5.0V up to 2Amp for 100∝s |
Standby Power | 0.1W |
Onboard Voltages | VCC Core, 1.05V, 1.8V, 0.9V, CoreVCC, 1.5V |
Power Consumption | 4W |
Use inductors in series to reduce the maximum inrush current!
Physical Characteristics
Specification
Dimensions | Length: | 65 mm +/- 0.1mm |
| Depth: | 58 mm +/- 0.1mm |
| Height: | 11 mm +/- 0.2mm (with 5mm bus connectors) |
|
| 14 mm +/- 0.2mm (with 8mm bus connectors) |
| The connector height is selected by the connector on the carrier board. | |
Weight | 70 gr / 8 ounces | |
PCB Thickness | 1.6 mm / 0.0625 inches nominal | |
PCB Layer | Multilayer |
|
13