BIOS
Auto: If your ISA card and PCI card are all PNP cards, BIOS will assign the interrupt resource automatically.
Reset Configuration Data: This setting allows you to clear ESCD data. The default is Disabled
Disabled: Normal Setting.
Enabled: If you have plugged in some Legacy cards to the system and they were recorded into ESCD (Extended System Configuration Data), you can set this field to Enabled in order to clear ESCD.
CPU to PCI Write Buffer: When enabled, up to four D words of data can be written to the PCI bus without interruting the CPU. When disabled, a write buffer is not used and the CPU read cycle will not be completed until the PCI bus signals that it is ready to receive the data.
The Choice: Enabled, Disabled.
PCI Dynamic Bursting: When Enabled, data transfers on the PCI bus, where possible, make use of the
The Choice: Enabled, Disabled.
PCI Master 0 WS Write: When Enabled, writes to the PCI bus are command with zero wait states.
The Choice: Enabled, Disabled.
PCI Delay Transaction: The chipset has an embedded
The Choice: Enabled, Disabled.
PCI #2 Access #1 Retry: This item allows you enabled/disable the PCI #2 Access #1 Retry.
The Choice: Enabled, Disabled.
AGP Master 1 WS Write: When Enabled, writes to the AGP bus are executed with one wait states.
The Choice: Enabled, Disabled.
Page