Compaq 3000 manual Regulatory Compliance Notices, Federal Communications Commission Notice

Page 124

B-1

Appendix B

Regulatory Compliance Notices

Federal Communications

Commission Notice

Part 15 of the Federal Communications Commission (FCC) Rules and Regulations has established Radio Frequency (RF) emission limits to provide an interference-free radio frequency spectrum. Many electronic devices, including computers, generate RF energy incidental to their intended function and are, therefore, covered by these rules. These rules place computers and related peripheral devices into two classes, A and B, depending upon their intended installation. Class A devices are those that may reasonably be expected to be installed in a business or commercial environment. Class B devices are those that may reasonably be expected to be installed in a residential environment (i.e., personal computers). The FCC requires devices in both classes to bear a label indicating the interference potential of the device as well as additional operating instructions for the user.

The rating label on the device shows which class (A or B) the equipment falls into. Class B devices have an FCC logo or FCC ID on the label. Class A devices do not have an FCC logo or ID on the label. Once the class of the device is determined, refer to the following corresponding statement.

ProLiant 3000 Setup and Installation Guide

Image 124
Contents ProLiant Compaq ProLiant 3000 Setup and Installation Guide Contents Installation Overview Iv About This GuideInstalling Hardware Options Integrated Management Vi About This GuideAppendix C ViiHow this Manual is Organized About This GuideViii About This Guide Text Conventions KeysSymbols in Text Product Safety InformationSymbols on Equipment About This GuideProLiant 3000 Setup and Installation Guide Getting Help Compaq CDsCompaq Systems Reference Library CD Compaq SmartStart and Support Software CDOther Hardcopy Documents Compaq Web SiteCompaq Management CD XiiiTelephone Numbers Xiv About This GuideFinland 9800-206-720 90-6155-9899 Xvi About This Guide Standard Features Compaq ProLiant 3000 Server FeaturesProcessor Boards 2Compaq ProLiant 3000 Server Features Cache Memory and System ArchitectureSystem Memory Expansion SlotsKeyboard Media BaysVideo 4Compaq ProLiant 3000 Server Features High-Availability FeaturesSystem Management Warranty Power SupplyFans 6Compaq ProLiant 3000 Server Features Management and Configuration ToolsSmartStart Disk Drive Fault Tolerance Compaq Insight ManagerAutomatic Server Recovery-2 ASR2 Security Features8Compaq ProLiant 3000 Server Features Compaq Integrated Remote Console Compaq Integrated Management DisplaySupported Drive Configurations 10Compaq ProLiant 3000 Server FeaturesInterlock Switches Installation Overview Server Warnings and Precautions 2Installation OverviewPre-installation Planning Power Requirements4Installation Overview Server Temperature RequirementsGrounding Installation Procedure Installing a Rack Mount ModelInstalling a Tower Model 6Installation OverviewProLiant 3000 Setup and Installation Guide Rack-Mount Server Installation Rack Warnings and Precautions2Rack-Mount Server Installation Rack Temperature Requirements Rack Internal Temperature Maximums4Rack-Mount Server Installation Airflow RequirementsUnpacking the Server Locating Materials and Documentation6Rack-Mount Server Installation ProLiant 3000 Setup and Installation Guide 8Rack-Mount Server Installation Preparing the Mounting Brackets Slide Rail AssembliesAttaching the Bracket Rail to the Mounting Bracket 10Rack-Mount Server Installation Removing the component rail from the bracket railProLiant 3000 Setup and Installation Guide 12Rack-Mount Server Installation Attaching the bracket rail to the mounting bracket 14Rack-Mount Server Installation Attaching the Mounting Bracket Slide Assembly to the RackMeasuring with the Template ProLiant 3000 Setup and Installation Guide 16Rack-Mount Server Installation Inserting Cage Nuts in the Rack FrameAttaching the Mounting Bracket Assembly to the Rack Inserting cage nuts18Rack-Mount Server Installation Important Use only the bottom hole of the bracket as shown11.Cage nut and back of mounting bracket assembly installed 20Rack-Mount Server Installation Attaching Component Rails to the ServerAttaching the Cable Management Arm Bracket 13.Attaching a cable management arm bracket to the server22Rack-Mount Server Installation Loading the Rack Server14.Loading the rack server 24Rack-Mount Server Installation Attaching the Cable Management ArmProLiant 3000 Setup and Installation Guide 26Rack-Mount Server Installation Attaching the Optional Cable SupportOptional Installation Service 17.Attaching the cable support to the rackInstalling Hardware Options Accessing Processors, Memory Board, System Board Accessing Non Hot-Plug Areas2Installing Hardware Options ProLiant 3000 Setup and Installation Guide Accessing the Processor 4Installing Hardware OptionsRemoving the terminator board Accessing Other System Board Components 6Installing Hardware OptionsSystem Board Switches Accessing Dimm Sockets on the Memory Board8Installing Hardware Options Removing the memory boardInstalling memory board Memory Banks10Installing Hardware Options Memory banks on the system board J12 J11 J10 BankAccessing the Drive Cage Back Plane 12Installing Hardware Options 10.Removing a fan11.Removing the front panel 14Installing Hardware Options 12.Partially pull out the drive cageInstalling the Duplex Enable Board Option 14.Removing the simplex enable board16Installing Hardware Options 15.Installing the duplex enable board16.Re-installing the drive cage 18Installing Hardware Options 17.Connectors on back of drive cageReplacing the Side Access Panel 18.Example cable connection to Scsi controller20Installing Hardware Options Interlock SystemAccessing Dimm Sockets on System Board 19.Removing the side panel22Installing Hardware Options 20.Installing system board Dimm banksAccessing Hot-Plug Areas Accessing the Hot-Plug Scsi Drives24Installing Hardware Options Scsi ID Numbers 26Installing Hardware Options Or Channel BPre-Failure Warranty Insight Manager AlertServer Configuration Utilities Configuring the Server with SmartStart2Server Configuration and Utilities Inserting the CD-ROMUsing the System Configuration Utility 4Server Configuration and Utilities Resolving Resource ConflictsStarting the System Configuration Utility System Configuration Menu System Configuration Utility Main Menu6Server Configuration and Utilities Configuring Hardware Add or Remove Boards8Server Configuration and Utilities System PartitionCreating a New System Partition Verifying the System Partition 10Server Configuration and UtilitiesUpgrading the System Partition Configuration Backup Configuration Backup Configuration History FilesSystem Configuration History Log Files 12Server Configuration and UtilitiesInstalling an Operating System Configuring PCI Boards AutomaticallyRemoving Boards 14Server Configuration and Utilities SMP Operating System SupportLoading Compaq Device Drivers Manual installationNovell NetWare Device Drivers form Compaq 16Server Configuration and Utilities Microsoft Windows NT Device Drivers from CompaqSCO OpenServer and SCO UnixWare Device Drivers from Compaq 18Server Configuration and Utilities IBM OS/2 Device Drivers from CompaqBanyan Vines Device Drivers from Compaq Diagnostics and Other Utilities 20Server Configuration and UtilitiesIntegrated Management Display Integrated ManagementNormal Run-time Behavior 2Integrated Management Idle Screen TextNavigation Buttons Integrated Management Display buttonsIntegrated Management Display Symbols Display Symbols4Integrated Management System Behavior with Error Events AlertMenu Structure 6Integrated ManagementIntegrated Management Log Compaq Insight Manager Multiple Ways of Viewing the Log8Integrated Management Viewing the Event List Compaq IML Management Utility Compaq Survey Utility10Integrated Management List of Events END of EventEvent Messages 12Integrated ManagementEvent Type Event Message Post Error Power Cord Set Requirements General Requirements2Power Cord Set Requirements Table A-1 Power Cord Set Requirements By CountryCountry-Specific Requirements Regulatory Compliance Notices Federal Communications Commission NoticeClass B Equipment Class a Equipment2Regulatory Compliance Notices Modifications CablesEuropean Union Notice Canadian NoticeAvis Canadien4Regulatory Compliance Notices Japanese Notice Australian Notice Laser Safety Warnings Laser DevicesCompliance with Cdrh Regulations Compliance with International RegulationsLaser Product Label Laser InformationBattery Replacement Notice 8Regulatory Compliance NoticesTable C-1 Internal CD-ROM DriveInternal CD-ROM Index Index-1Index Index-3 Scsi Index-5
Related manuals
Manual 103 pages 29.73 Kb