Compaq 3000 manual Fans, Power Supply, Warranty

Page 21

1-5

■Integrated Management Display (IMD) offers a text-based user interface. The IMD displays and stores key system events at the server so that critical information is at your fingertips.

■Integrated Management Log (IML) provides a detailed log of key system events. This log is accessible through Insight Manager, the Remote Insight board, the Compaq Survey utility, the Compaq IML Management utility, and the IMD.

ROM

■Software upgradable firmware including diagnostics

■ROMPaq Utility used to upgrade ROM

Fans

■Standard: Two 120-mm fans and one 92-mm CPU auxiliary fan

■Optional: Two 120-mm redundant fans

Power Supply

■Standard: One hot-plug 750-W (at 220V) power supply

■Optional: One hot-plug 750-W (at 220V) redundant supply (RPS)

Warranty

■Pre-Failure Warranty on processors, memory, hard drives, and power supplies

ProLiant 3000 Setup and Installation Guide

Image 21

Contents ProLiant Compaq ProLiant 3000 Setup and Installation Guide Contents Iv About This Guide Installation OverviewInstalling Hardware Options Vi About This Guide Integrated ManagementVii Appendix CAbout This Guide How this Manual is OrganizedViii About This Guide Keys Text ConventionsProduct Safety Information Symbols in TextSymbols on Equipment About This GuideProLiant 3000 Setup and Installation Guide Compaq CDs Getting HelpCompaq Systems Reference Library CD Compaq SmartStart and Support Software CDCompaq Web Site Other Hardcopy DocumentsCompaq Management CD XiiiXiv About This Guide Telephone NumbersFinland 9800-206-720 90-6155-9899 Xvi About This Guide Compaq ProLiant 3000 Server Features Standard FeaturesProcessor Boards Cache Memory and System Architecture 2Compaq ProLiant 3000 Server FeaturesSystem Memory Expansion SlotsMedia Bays KeyboardVideo High-Availability Features 4Compaq ProLiant 3000 Server FeaturesSystem Management Power Supply WarrantyFans Management and Configuration Tools 6Compaq ProLiant 3000 Server FeaturesSmartStart Compaq Insight Manager Disk Drive Fault ToleranceSecurity Features Automatic Server Recovery-2 ASR28Compaq ProLiant 3000 Server Features Compaq Integrated Management Display Compaq Integrated Remote Console10Compaq ProLiant 3000 Server Features Supported Drive ConfigurationsInterlock Switches Installation Overview 2Installation Overview Server Warnings and PrecautionsPower Requirements Pre-installation PlanningServer Temperature Requirements 4Installation OverviewGrounding Installing a Rack Mount Model Installation Procedure6Installation Overview Installing a Tower ModelProLiant 3000 Setup and Installation Guide Rack Warnings and Precautions Rack-Mount Server Installation2Rack-Mount Server Installation Rack Internal Temperature Maximums Rack Temperature RequirementsAirflow Requirements 4Rack-Mount Server InstallationLocating Materials and Documentation Unpacking the Server6Rack-Mount Server Installation ProLiant 3000 Setup and Installation Guide Preparing the Mounting Brackets Slide Rail Assemblies 8Rack-Mount Server InstallationAttaching the Bracket Rail to the Mounting Bracket Removing the component rail from the bracket rail 10Rack-Mount Server InstallationProLiant 3000 Setup and Installation Guide 12Rack-Mount Server Installation Attaching the bracket rail to the mounting bracket Attaching the Mounting Bracket Slide Assembly to the Rack 14Rack-Mount Server InstallationMeasuring with the Template ProLiant 3000 Setup and Installation Guide Inserting Cage Nuts in the Rack Frame 16Rack-Mount Server InstallationInserting cage nuts Attaching the Mounting Bracket Assembly to the RackImportant Use only the bottom hole of the bracket as shown 18Rack-Mount Server Installation11.Cage nut and back of mounting bracket assembly installed Attaching Component Rails to the Server 20Rack-Mount Server Installation13.Attaching a cable management arm bracket to the server Attaching the Cable Management Arm BracketLoading the Rack Server 22Rack-Mount Server Installation14.Loading the rack server Attaching the Cable Management Arm 24Rack-Mount Server InstallationProLiant 3000 Setup and Installation Guide Attaching the Optional Cable Support 26Rack-Mount Server Installation17.Attaching the cable support to the rack Optional Installation ServiceInstalling Hardware Options Accessing Non Hot-Plug Areas Accessing Processors, Memory Board, System Board2Installing Hardware Options ProLiant 3000 Setup and Installation Guide 4Installing Hardware Options Accessing the ProcessorRemoving the terminator board 6Installing Hardware Options Accessing Other System Board ComponentsAccessing Dimm Sockets on the Memory Board System Board SwitchesRemoving the memory board 8Installing Hardware OptionsMemory Banks Installing memory boardMemory banks on the system board J12 J11 J10 Bank 10Installing Hardware OptionsAccessing the Drive Cage Back Plane 10.Removing a fan 12Installing Hardware Options11.Removing the front panel 12.Partially pull out the drive cage 14Installing Hardware Options14.Removing the simplex enable board Installing the Duplex Enable Board Option15.Installing the duplex enable board 16Installing Hardware Options16.Re-installing the drive cage 17.Connectors on back of drive cage 18Installing Hardware Options18.Example cable connection to Scsi controller Replacing the Side Access PanelInterlock System 20Installing Hardware Options19.Removing the side panel Accessing Dimm Sockets on System Board20.Installing system board Dimm banks 22Installing Hardware OptionsAccessing the Hot-Plug Scsi Drives Accessing Hot-Plug Areas24Installing Hardware Options Scsi ID Numbers Or Channel B 26Installing Hardware OptionsInsight Manager Alert Pre-Failure WarrantyConfiguring the Server with SmartStart Server Configuration UtilitiesInserting the CD-ROM 2Server Configuration and UtilitiesUsing the System Configuration Utility Resolving Resource Conflicts 4Server Configuration and UtilitiesStarting the System Configuration Utility System Configuration Utility Main Menu System Configuration Menu6Server Configuration and Utilities Add or Remove Boards Configuring HardwareSystem Partition 8Server Configuration and UtilitiesCreating a New System Partition 10Server Configuration and Utilities Verifying the System PartitionUpgrading the System Partition Configuration Backup Configuration History Files Configuration Backup12Server Configuration and Utilities System Configuration History Log FilesConfiguring PCI Boards Automatically Installing an Operating SystemRemoving Boards SMP Operating System Support 14Server Configuration and UtilitiesManual installation Loading Compaq Device DriversNovell NetWare Device Drivers form Compaq Microsoft Windows NT Device Drivers from Compaq 16Server Configuration and UtilitiesSCO OpenServer and SCO UnixWare Device Drivers from Compaq IBM OS/2 Device Drivers from Compaq 18Server Configuration and UtilitiesBanyan Vines Device Drivers from Compaq 20Server Configuration and Utilities Diagnostics and Other UtilitiesIntegrated Management Integrated Management DisplayNormal Run-time Behavior Idle Screen Text 2Integrated ManagementIntegrated Management Display buttons Navigation ButtonsDisplay Symbols Integrated Management Display Symbols4Integrated Management Alert System Behavior with Error Events6Integrated Management Menu StructureIntegrated Management Log Multiple Ways of Viewing the Log Compaq Insight Manager8Integrated Management Viewing the Event List Compaq Survey Utility Compaq IML Management Utility10Integrated Management END of Event List of Events12Integrated Management Event MessagesEvent Type Event Message Post Error General Requirements Power Cord Set RequirementsTable A-1 Power Cord Set Requirements By Country 2Power Cord Set RequirementsCountry-Specific Requirements Federal Communications Commission Notice Regulatory Compliance NoticesClass a Equipment Class B Equipment2Regulatory Compliance Notices Cables ModificationsCanadian NoticeAvis Canadien European Union Notice4Regulatory Compliance Notices Japanese Notice Australian Notice Laser Devices Laser Safety WarningsCompliance with Cdrh Regulations Compliance with International RegulationsLaser Information Laser Product Label8Regulatory Compliance Notices Battery Replacement NoticeInternal CD-ROM Drive Table C-1Internal CD-ROM Index-1 IndexIndex Index-3 Scsi Index-5

Related manuals

Manual 103 pages 29.73 Kb