Note
Computer names must be less than or equal to ten characters to run some types of software.
12.Enter a Computer name. This name must be unique to other computers on the same network. Press ENTER.
Note
Your system has been set up to enable auto logon. Auto logon allows the system to boot into Windows without your having to use a keyboard to press
13.You will be prompted for a password.
• Login Recommendation
•If you type admin as your Administrator password, your military computer will automatically log on as Administrator.
•Log onto the system as Administrator when you power up the system. Doing so eliminates the requirement to log on to DP027010 when you run any project that requires a user named Administrator. All DP027010 projects are configured with an Administrator user by default
•To use the auto logon feature, type admin for the password. Press the TAB key and type admin in the Confirm Password box. Press ENTER.
•To assign a password, type in a password, press the TAB key, and type the password in the Confirm Password box. Press ENTER.
14.To skip the password, press ENTER
15.Press ENTER to continue with the Windows Setup.
16.After completing the network setup, the system will copy files over and finalize its setup.
17.At the end of the setup process, you will be asked to reboot the system. Press ENTER.
Page 12
Copyright March 2003, Computer Dynamics, Inc.
All Rights Reserved