Compaq 3134 manual LED Indicator Descriptions, NC3133, NC6132, and NC6133 Fiber Upgrade Modules

Page 12

1-4Compaq NC3134 Fast Ethernet Server Adapter User Guide

NC3133, NC6132, and NC6133 Fiber Upgrade Modules

The NC3133, NC6132, and NC6133 fiber upgrade modules each have one SC fiber port and LEDs indicating link and activity.

Figure 1-4. NC3133, NC6132, and NC6133 fiber SC port and LED indicators

LED Indicator Descriptions

NC3134 and NC3135 LED Indicators

The Compaq NC3134 adapter and NC3135 upgrade modules have two diagnostic LED indicators for each RJ-45 port. The speed of the transmission (10 or 100 Mb/s) is indicated by the LED color.

Table 1-2

10/100 LED Operations for the NC3134 Adapter and NC3135 Upgrade Module

LED	Display	Description

LNK	On -- Amber	The adapter is receiving power; the cable connection between the
		hub/switch and adapter is good and the link is established at 10 Mb/s.

	On -- Green	The adapter is receiving power; the cable connection between the
		hub/switch and adapter is good and the link is established at 100 Mb/s.

	Off	The adapter is not receiving power or the cable connection between the
		hub/switch and adapter is faulty.

ACT	Blinking Amber	The adapter is sending or receiving network data at 10 Mb/s.

	Blinking Green	The adapter is sending or receiving network data at 100 Mb/s.

	Off	The adapter is not sending or receiving network data.

Image 12

Contents NC3134 Fast Ethernet Server Adapter Page Contents Appendix B Symbols in Text About This GuideWhere to Go for Additional Help Compaq Technician NotesDownload the drivers, firmware, or documentation as needed Compaq Customer Support Compaq WebsitePaqFax Number Worldwide Access Calling the Compaq Support LineNorth America Europe, the Middle East, and AfricaIntroduction OverviewNC3134 Adapter 2Compaq NC3134 Fast Ethernet Server Adapter User GuideUpgrade Modules NC3135 Upgrade ModuleNC7132 Upgrade Module LED Indicator Descriptions NC3133, NC6132, and NC6133 Fiber Upgrade ModulesNC3134 and NC3135 LED Indicators UTP and Fiber Cable Specifications NC7132 LED IndicatorsNC7132 Gigabit Upgrade Module LED Indicators Fiber Upgrade Module LED IndicatorsInstalling the Upgrade Module Adapter Electrostatic Discharge PrecautionsAttaching the Upgrade Module Installing the Upgrade Module on the AdapterRemoving the Adapter from a Server Installing the Upgrade Module and Adapter Installing the Adapter in a Server Installing the adapter in a serverConnecting the Network Cable Connecting UTP Network CableConnecting Fiber Network Cable UTP Network Cable TypesConnecting and Using Loop-Back Plugs RJ-45 Loop-Back PlugRegulatory Compliance Notices Federal Communications Commission NoticeClass a Equipment Class B Equipment ModificationsCanadian Notice Avis Canadien European Union NoticeChina Taiwan Notice Japanese Notice Electrostatic Discharge Grounding MethodsSpecifications NC3134 Fast Ethernet Server Adapter SpecificationsUpgrade Module Specifications NC3132 10/100 Upgrade ModuleNC3135 10/100 Upgrade Module NC6132 1000BASE-SX Upgrade Module NC6133 1000BASE-LX Upgrade ModuleNC3133 100BASE-FX Upgrade Module UTP Cable Specifications NC7132 1000BASE-T Gigabit over Copper Upgrade ModuleTable C-7 NC7132 Gigabit over Copper Upgrade Module Table C-8 UTP Cable SpecificationsRJ-45 Pinouts and Crossover Function 10/100 Straight-Through PinoutsTable C-10 10/100 Pinouts Using External Crossover 10/100 Crossover PinoutsGigabit over Copper Internal Straight-Through Pinouts Specifications C-7 Gigabit over Copper External Crossover Pinouts Table C-12 Gigabit over Copper Crossover PinoutsFiber Cable Specifications