Onkyo 29400046, UP-HT1, I0905-1 Setting the Blend Mode, Displaying HD Radio Information, En-17

Setting the Blend Mode

HD Radio transmissions contain analog and digital signals. If available, the digital signal is used auto- matically. In areas with poor reception, you may want to choose the analog signal.

1. Press [ENTER] repeatedly to select Auto

Displaying HD Radio Information

Press the [DISPLAY] button repeatedly to cycle through the available information.

	Preset channel number
	HD Radio
Station name	channel number

or Analog.

Station name & HD Radio chan- nel number

Indicates HD Radio reception

Auto: Select to use the digital signal when avail- able.

Anlg (Analog): Select to use the analog signal.

Note: Multicast channels 2 through 8 are digital only, so you must select multicast channel #1 before you can change the Blend mode.

HD channel, Artist name, and Song title are dis- played in the 2nd line if the connected product has a two-line display.

Preset channel

Frequencynumber

Frequency & Preset channel number

Scrolling station information

Station information

En-17