Erasing Presets
1.Select the preset you want to erase.
2.Press the [SETUP] button, and then use Up/Down Arrow [
]/[ 
] buttons to select “Preset Erase”.
3.Press [ENTER].
A message requesting confirmation appears. To cancel the Preset Erase function at this point, press the [RETURN] button.
4.To erase the preset, press [ENTER].
The preset is erased and “Erase OK?” appears on the display.
5.Press [ENTER].
The preset is erased and “Complete” appears on the display.
Naming Presets
You can name presets for easy identification. The pre- set name may contain of up to ten characters.
1.Select the preset you want to name.
2.Press the [SETUP] button, and then use the Up/Down Arrow [
]/[ 
] buttons to select “Name Edit”
3.Press [ENTER].
4.Use the Up/Down [
]/[ 
] buttons to select the available characters (see next
page), and use the Left/Right [
]/[
] but- tons to move the cursor.
5.When you’ve finished entering the name,
press [ENTER].
“Name Edit” appears on the display.