Christie Digital Systems 38-VIV202-01 user manual Connecting Projector, Terminals of Projector

CONNECTING PROJECTOR

TERMINALS OF PROJECTOR

This projector has input and output terminals on its back for connecting computers and video equipment. Refer to figures on pages 11 to 13 and connect properly.

	COMPUTER INPUT
COMPUTER AUDIO	TERMINALS (DIGITAL/ANALOG)
INPUT (1 and 2) JACKS	Connect the computer (digital/analog)
Connect the audio output	output to one of these terminals.
	(Refer to P12.)
(stereo) from the computer							R/C JACK
to these jacks.
							When using the Wired/Wireless
(Refer to P12.)
							Remote Control Unit as a Wired
							Remote Control, connect the
USB CONNECTOR (Series B)							Wired Remote Control Unit to
			INPUT 1				this jack with the Remote
	ANALOG			DIGITAL(DVI-D)			Control Cable (supplied).
When controlling the computer						R/C JACK
with the Remote Control Unit of
the projector, connect the USB		USB	RESET		CONTROL PORT
	AUDIO 1			AUDIO 2
port of your personal computer							CONTROL PORT CONNECTOR
to this terminal. (Refer to P12.)
	G	B		R	H/V	V	When controlling the computer
							with the Remote Control Unit
	VIDEO/Y	Cb/Pb		Cr/Pr			of the projector, connect the
RESET BUTTON				INPUT 2
	VIDEO/Y Cb/Pb		Cr/Pr	R–AUDIO–L		S–VIDEO	mouse port of your personal
This projector uses a micro processor							computer to this connector.
							(Refer to P12.)
to control this unit, and occasionally					(MONO)
this micro processor may malfunction				INPUT 3
and need to be reset. This can be
done by pressing the RESET button
with a pen, which will shut down and
restart unit. Do not use the RESET
function excessively.

✽ Do not press this button. This button
is used for our optional accessories.
		VIDEO INPUT JACKS	AUDIO INPUT JACKS	S-VIDEO INPUT JACK
		Connect the composite video	Connect the audio output	Connect the S-VIDEO
	5 BNC INPUT JACKS
		output from video equipment to	from video equipment to	output from video
	Connect the component video	the VIDEO/Y jack or connect	these jacks.	equipment to this
	output (Y, Cb, Cr or Y, Pb, Pr)	the component video outputs to	(Refer to P13.)	jack. (Refer to P13.)
	from video equipment to	the VIDEO/Y, Cb/Pb and Cr/Pr	When the audio output is
	VIDEO/Y, Cb/Pb and Cr/Pr	jacks. (Refer to P13.)	monaural, connect it to
	jacks or connect computer		the L (MONO) jack.
	output {5 BNC Type (Green,
	Blue, Red, Horiz. Sync and
	Vert. Sync.)} from computer
	to G, B, R, H/V and V jacks.
	(Refer to P12 and 13.)

11