Christie Digital Systems 020-000141-01 user manual Connecting the AC Power Cord

Installation

Connecting the AC Power Cord

This projector uses nominal input voltages of 100-120 or 200–240 V AC. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system. If you are not sure of the type of power being supplied, consult your authorized dealer or service station.

Connect the projector with all peripheral equipment before turning on the projector.

CAUTION

The AC outlet must be near this equipment and must be easily accessible.

Note:

s5NPLUG THEH!# POWER CORD OR TURNR OFFF THEH -!). /./&&

3WITCHHWHEN THEHPROJECTOREIS NOTOIN USE HEN THEHPROJECTORE IS IN STANDBYYMODEOIT CONSUMESTA LITTLELELECTRIC POWER

Connect the AC power cord (supplied) to the projector.

NOTE ON THE POWER CORD

AC power cord must meet the requirements of the country where you use the projector.

Confirm the AC plug type with the chart below and proper AC power cord must be used.

If the supplied AC power cord does not match your AC outlet, contact your sales dealer.

Projector side	AC Outlet side
For the U.S.A. and Canada	For Continental Europe
Ground

To POWER CORD
CONNECTOR on your	To the AC Outlet.	To the AC Outlet.
projector.	(120 V AC)	(200–240 V AC)

22	LX1000 User Manual
	020-000141-01 Rev. 1 (05-2009)