Christie Digital Systems 020-000141-01 user manual Remote Control Code, Number of Times

Part Names and Functions

Remote Control Code

The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote control codes prevents interference from other remote controls when several projectors or video equipment next to each other are operated at the same time. Change the remote control code for the projector first before changing that for the remote control. See “Remote control” in the Setting Menu on page 52.

1Check the Reset Switch to "Use position" in the compartment lid on the back of the remote control.

2and release the IMAGE ADJ. button the number

of corresponding times you would like to set the number of the remote control code for the projector.While holding down the MENU button, press

	Number of Times
Remote Control Code	Pressing IMAGE ADJ.
	button
Code 1	1
Code 2	2
Code 3	3
Code 4	4
Code 5	5
Code 6	6
Code 7	7
Code 8	8

Reset position Use position

Reset switch

MENU button

IMAGE ADJ.

button

16	LX1000 User Manual
	020-000141-01 Rev. 1 (05-2009)