Christie Digital Systems 020-000141-01 user manual Screen Size Adjustment, Screen Menu

Computer Input

Screen Size Adjustment

Select the desired screen size that conforms to the input signal source.

1Press the MENU button to display the On-Screen Menu. Use the Point  buttons to move the red frame pointer to the Screen Menu icon.

2Use the Point ! buttons to move the red frame pointer to the desired function and then press the SELECT button.

Normal

Provide the image at the normal computer aspect ratio of 4:3.

True

Provide the image in its original size. When the original image size is larger than the screen size (1024 x 768), the projector enters to the panning mode automatically. Use the Point ! 

buttons to pan the image. When adjusted, the arrows will

turn red. When reached to the correction limits, the arrows will disappear.

Wide

Provide the image to fit the wide video aspect ratio (16:9) by expanding the image width uniformly. This function can be used to provide the squeezed video signal at 16:9.

Full screen

Provide the full screen image.

SCREEN MENU

Screen Menu icon

Move the red frame pointer to the desired function and press the SELECT button.

Note:

ss4RUEE&ULLLSCREENCANDE$IGITAL ZOOMOn CANNOT BE SELECTEDLWHEN NOESIGNAL ISEDETECTED INSTHEG 0# 3YSTEM -ENU P

ss4HEE PROJECTORE CANNOTN DISPLAYY ANDN RESOLUTION HIGHER THAN  X  )F YOURU COMPUTERS SCREEN RESOLUTION IS HIGHER THAN  X 

LOWER THEH RESOLUTION BEFORER CONNECTING THE PROJECTOR

ss4HE IMAGE DATAAOTHERTTHAN 8'!!X IS MODIFIED TOIFITDTHETSCREEN SIZEEIN INITIAL MODE ss4HE PANNING FUNCTIONGMAYYNOTNOPERATEOPROPERLY IF THE STORED -ODE INRTHED0# !DJUSTU-ENU IS-

USEDEP

Custom

Adjust the screen scale and position manually with this function.

Press the SELECT button at Custom and the “Custom” is displayed on the screen for a few seconds. To display the Aspect dialog box, press the SELECT button at Custom again and then the Aspect dialog box appears.

Scale H/V	Adjust the Horizontal/Vertical screen scale.
H&V	When set to “On,” the aspect ratio is
	fixed. The “Scale V” appears dimmed and
	becomes unavailable. Adjust “Scale H,”
	then the screen scale is automatically
	modified based on the aspect ratio.
Position H/V	Adjust the Horizontal/Vertical screen
	position.
Common	Save the adjusted scale to all the inputs.
	Press the SELECT button at Common to
	display a confirmation box. To save the
	scale, press the SELECT button at “Yes.”
	When Custom is selected, the saved scale
	is used.
Reset	Reset the all adjusted values. Press
	the SELECT button at Reset to display
	a confirmation box. To reset, press the
	SELECT button at “Yes.”

Press the SELECT button at Common or

Reset, to display a confirmation box.

Note:

ssHEN NONSIGNAL ISSDETECTEDLh.ORMALv ISASETv

AUTOMATICALLYTANDCTHEL!SPECTEDIALOG BOXXDISAPPEARS

ss4HE ADJUSTABLE RANGE FOR 3CALE (6 AND 0OSITIONT(6O

IS LIMITED DEPENDING ONDTHEPINPUTDSIGNAL

LX1000 User Manual	39
020-000141-01 Rev. 1 (05-2009)