BOXLIGHT CP-320t Basic Operation, Turning on / OFF Projector, Turning on Projector, Lamp mode

Page 19

BASIC OPERATION

TURNING ON / OFF PROJECTOR

TURNING ON PROJECTOR

1

Complete peripheral connections (with Computer, VCR, etc.)

 

before turning on the projector. (Refer to "CONNECTING

 

PROJECTOR" on page 11~13.)

2

Connect the projector's AC Power Cord into an AC outlet. The

 

LAMP Indicator lights red, and the READY Indicator lights green.

 

NOTE : When “On start” function is ON, this projector is turned

 

on automatically by connecting AC Power Cord to an

 

AC outlet. (Refer to the menu item "On start" on page

 

37.)

3

Press the POWER ON-OFF button on the Top Control or on the

 

Remote Control to ON. The LAMP Indicator dims, and the

Cooling Fans start to operate. The Preparation Display appears on the screen and the count-down starts.

26

The Preparation Display disappears after 30 seconds.

Lamp mode

4

The input source that was selected last and the Lamp mode

 

status icon appears on the screen after the count-down. The

signal from PC or Video source appears after 30 seconds.

*Refer to page 37 for the Lamp mode.

TURNING OFF PROJECTOR

1

Press the POWER ON-OFF button on the Top Control or on the

 

Remote Control, and a message "Power off?" appears on a

 

screen.

2

Press the POWER ON-OFF button again to turn off the

 

projector. The LAMP Indicator lights bright and the READY

 

Indicator turns off. After the projector is turned off, the Cooling

 

Fans operate (for 90 seconds).

3

When the projector has cooled down, the READY Indicator lights

 

green again.

NOTE : The projector cannot be turned on during cooling period with the READY Indicator off. You can turn it on again after the READY Indicator lights green.

TO MAINTAIN THE LIFE OF LAMP, ONCE YOU TURN PROJECTOR ON, WAIT AT LEAST 5 MINUTES BEFORE TURNING IT OFF.

DO NOT DISCONNECT AC POWER CORD BEFORE READY INDICATOR LIGHTS GREEN.

Power off?

The message disappears after 4 seconds.

note on operation

When “Power management” function is ON, the projector detects signal interruption and turns off the Projection Lamp automatically. Refer to “Power management” on page 37.

When the WARNING TEMP. indicator flashes red, the projector is automatically turned off. When the temperature inside the projector returns to normal, the READY indicator lights green. Then you can turn the projector back on. The WARNING TEMP. indicator stops flashing after turning the projector on.

When the WARNING TEMP. indicator continues to flash after turning the projector back on, refer to the section "MAINTENANCE" on page 41 and proper maintenance should be taken.

19

Image 19
Contents Boxlight CP-320t To the Owner Voor de klanten in Nederland Safety InstructionsFederal Communication Commission Notice CompliancesTable of Contents Component Video Features and DesignComputers Color SystemsName of Each Part of Projector PreparationFor the U.S.A. and Canada SETTING-UP ProjectorConnecting AC Power Cord For Continental EuropePreparation Positioning Projector Adjustable FeetRoom Light Moving Projector Preparation Installing Projector in Proper PositionComputer Input DIGITAL/ANALOG Connecting ProjectorTerminals of Projector Video Input Jack Audio Input JacksTerminals Projector Connecting to ComputerTerminals Connecting to Video EquipmentLaser Pointer Function Operation of Remote ControlDIP Switch in the Battery Compartment Before OperationRemote Control Batteries Installation Lamp Replace Indicator TOP Controls and IndicatorsOperating ON-SCREEN Menu HOW to Operate ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Guide Window Before Operation Menu BARTurning on Projector Lamp modeBasic Operation Turning on / OFF ProjectorPicture Freeze Function Adjusting ScreenFocus Adjustment Keystone AdjustmentDirect Operation Sound AdjustmentTimer Function Basic Operation No Show FunctionInput Menu Selecting Input SourceRGB RGB Scart RGB Digital RGB AnalogSvga Selecting Computer SystemComputer Input Select Computer System ManuallyKHz Computer Input Compatible Computer SpecificationsResolution FreqAuto PC Adj PC AdjustmentAuto PC Adjustment PC Adjust MenuComputer Input Manual PC Adjustment Display area H Display areaFull screen Image 1~4 Picture Image AdjustmentsImage Level Select Direct Image Level Select MenuImage Adjust Menu Computer Input Image Level AdjustmentScreen Menu Picture Screen AdjustmentVideo Video InputAV System Menu Video or S-VIDEO Component Video Signal FormatSelecting Video System PAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-NImage button Standard Cinema CinemaVideo Input Image Level Adjustment Reset all adjustment to their previous figure Setting Menu SettingSetting Menu To change the code of the Projector To change the code of the Remote ControlLamp Replace Lamp ReplacementReset the Lamp Replace Counter AppendixAppendix Lamp Replace Counter Lamp Handling PrecautionsInstallation Operating Wireless MouseOperating Wireless Mouse TOP Control MaintenanceAIR Filter Care and Cleaning Cleaning Projection LensTroubleshooting Function does not Remote Control doesWireless Mouse Not workAppendix Indicators and Projector Condition Indicators Projector ConditionTechnical Specifications DVI-I Terminal DIGITAL/ANALOG Appendix Configurations of TerminalsTerminal HDB15-PIN Pin Configuration Computer INPUT/MONITOR Output Terminal AnalogOptional Parts Limited Warranty

CP-320t specifications

The BOXLIGHT CP-320t is a versatile and powerful interactive projector designed to enhance the learning and collaboration experience in various educational settings. Engineered with advanced technology, this projector aims to transform traditional teaching methods through captivating and engaging presentations.

One of the standout features of the CP-320t is its impressive brightness, boasting up to 3,200 ANSI lumens. This high level of brightness ensures vivid and clear images, making it ideal for use in well-lit classrooms or meeting rooms. The projector supports a native resolution of XGA (1024 x 768), delivering sharp details and vibrant colors that help facilitate effective communication.

The CP-320t incorporates an interactive capability that allows users to directly engage with projected content. The dual pen feature supports multiple users simultaneously, making it perfect for group activities and collaborative projects. This interactivity encourages student participation and fosters a more dynamic learning environment. Additionally, the projector offers touchscreen functionality, enabling gestures like tapping and swiping, reminiscent of using a tablet.

In terms of connectivity, the BOXLIGHT CP-320t excels with multiple inputs, including HDMI, VGA, and USB. This versatility allows for easy connectivity with various devices, such as laptops, tablets, and document cameras. The projector also features integrated speakers, providing clear audio to support multimedia presentations without the need for external sound systems.

Another notable characteristic of the CP-320t is its portability. Weighing only a few pounds, it can easily be transported between classrooms or offices. It also includes a long lamp life of up to 10,000 hours in eco mode, which significantly reduces maintenance costs and downtime, making it a cost-effective choice for schools and businesses.

The projector is equipped with the latest technologies to enhance image quality, including high contrast ratios and advanced color management systems, ensuring that visuals are both striking and accurate. The simple user interface allows for seamless navigation, making it easy for educators and presenters to adapt to different presentation needs without technical difficulties.

In summary, the BOXLIGHT CP-320t interactive projector combines brightness, interactivity, and connectivity in a portable, user-friendly package. Designed for modern educational environments, it provides an engaging platform that encourages participation and collaboration, making it an excellent choice for enhancing the teaching and learning experience.