BOXLIGHT CP-320t manual Computer Input Manual PC Adjustment

Page 26

COMPUTER INPUT

MANUAL PC ADJUSTMENT

This projector can automatically tune to the display signals from most personal computers currently distributed. However, some computers employ special signal formats which are different from the standard ones and may not be tuned by Multi- Scan system of this projector. If this happens, the projector cannot reproduce a proper image and the image may be recognized as a flickering picture, a non-synchronized picture, a non-centered picture or a skewed picture.

This projector has Manual PC Adjustment to enable you to precisely adjust several parameters to match with those special signal formats. This projector has 5 independent memory areas to memorize those parameters manually adjusted. This enables you to recall the setting for a specific computer whenever you use it.

1

Press the MENU button and the ON-SCREEN MENU will

 

appear. Press the POINT LEFT/RIGHT button to move the red

 

frame pointer to the PC ADJUST Menu icon.

2

Press the POINT DOWN button to move the red frame pointer to

 

the item that you want to adjust and then press the SELECT

button. An adjustment dialog box will appear. Press the POINT LEFT/RIGHT button to adjust value.

Fine sync

Adjusts an image as necessary to eliminate flicker from the display. Press the POINT LEFT/RIGHT button to adjust value.(From 0 to 31.)

Total dots

The number of total dots in one horizontal period. Press the POINT LEFT/RIGHT button(s) and adjust number to match your PC image.

Horizontal

Adjusts horizontal picture position. Press the POINT LEFT/RIGHT button(s) to adjust the position.

Vertical

Adjusts vertical picture position. Press the POINT LEFT/RIGHT button(s) to adjust the position.

Current mode

Press the SELECT button to show the information of computer selected.

Clamp

Adjusts clamp level. When the image has a dark bar(s), try this adjustment.

PC ADJUST MENU

PC ADJUST Menu icon

Move the red frame pointer to the item and press the SELECT button.

 

Shows status

Selected Mode

(Stored / Free) of the

selected Mode.

 

Press the POINT LEFT/RIGHT button to adjust the value.

Press the SELECT button at this icon to adjust “Clamp,” “Display area (H/V)” or set “Full screen.”

Current mode

Press the SELECT button at the Current mode icon to show the information of the computer connected.

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Boxlight CP-320t To the Owner Safety Instructions Voor de klanten in NederlandCompliances Federal Communication Commission NoticeTable of Contents Color Systems Features and DesignComputers Component VideoPreparation Name of Each Part of ProjectorFor Continental Europe SETTING-UP ProjectorConnecting AC Power Cord For the U.S.A. and CanadaRoom Light Adjustable FeetPreparation Positioning Projector Preparation Installing Projector in Proper Position Moving ProjectorVideo Input Jack Audio Input Jacks Connecting ProjectorTerminals of Projector Computer Input DIGITAL/ANALOGConnecting to Computer Terminals ProjectorConnecting to Video Equipment TerminalsBefore Operation Operation of Remote ControlDIP Switch in the Battery Compartment Laser Pointer FunctionRemote Control Batteries Installation TOP Controls and Indicators Lamp Replace IndicatorFlow of ON-SCREEN Menu Operation HOW to Operate ON-SCREEN MenuOperating ON-SCREEN Menu Before Operation Menu BAR Guide WindowTurning on / OFF Projector Lamp modeBasic Operation Turning on ProjectorKeystone Adjustment Adjusting ScreenFocus Adjustment Picture Freeze FunctionBasic Operation No Show Function Sound AdjustmentTimer Function Direct OperationRGB Scart RGB Digital RGB Analog Selecting Input SourceRGB Input MenuSelect Computer System Manually Selecting Computer SystemComputer Input SvgaFreq Computer Input Compatible Computer SpecificationsResolution KHzPC Adjust Menu PC AdjustmentAuto PC Adjustment Auto PC AdjComputer Input Manual PC Adjustment Full screen Display areaDisplay area H Image Level Select Menu Picture Image AdjustmentsImage Level Select Direct Image 1~4Computer Input Image Level Adjustment Image Adjust MenuPicture Screen Adjustment Screen MenuVideo Input VideoPAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-N Component Video Signal FormatSelecting Video System AV System Menu Video or S-VIDEOCinema Image button Standard CinemaVideo Input Image Level Adjustment Reset all adjustment to their previous figure Setting Menu SettingSetting Menu To change the code of the Remote Control To change the code of the ProjectorAppendix Lamp ReplacementReset the Lamp Replace Counter Lamp ReplaceLamp Handling Precautions Appendix Lamp Replace CounterOperating Wireless Mouse Operating Wireless MouseInstallation Cleaning Projection Lens MaintenanceAIR Filter Care and Cleaning TOP ControlTroubleshooting Not work Remote Control doesWireless Mouse Function does notIndicators Projector Condition Appendix Indicators and Projector ConditionTechnical Specifications Computer INPUT/MONITOR Output Terminal Analog Appendix Configurations of TerminalsTerminal HDB15-PIN Pin Configuration DVI-I Terminal DIGITAL/ANALOGOptional Parts Limited Warranty

CP-320t specifications

The BOXLIGHT CP-320t is a versatile and powerful interactive projector designed to enhance the learning and collaboration experience in various educational settings. Engineered with advanced technology, this projector aims to transform traditional teaching methods through captivating and engaging presentations.

One of the standout features of the CP-320t is its impressive brightness, boasting up to 3,200 ANSI lumens. This high level of brightness ensures vivid and clear images, making it ideal for use in well-lit classrooms or meeting rooms. The projector supports a native resolution of XGA (1024 x 768), delivering sharp details and vibrant colors that help facilitate effective communication.

The CP-320t incorporates an interactive capability that allows users to directly engage with projected content. The dual pen feature supports multiple users simultaneously, making it perfect for group activities and collaborative projects. This interactivity encourages student participation and fosters a more dynamic learning environment. Additionally, the projector offers touchscreen functionality, enabling gestures like tapping and swiping, reminiscent of using a tablet.

In terms of connectivity, the BOXLIGHT CP-320t excels with multiple inputs, including HDMI, VGA, and USB. This versatility allows for easy connectivity with various devices, such as laptops, tablets, and document cameras. The projector also features integrated speakers, providing clear audio to support multimedia presentations without the need for external sound systems.

Another notable characteristic of the CP-320t is its portability. Weighing only a few pounds, it can easily be transported between classrooms or offices. It also includes a long lamp life of up to 10,000 hours in eco mode, which significantly reduces maintenance costs and downtime, making it a cost-effective choice for schools and businesses.

The projector is equipped with the latest technologies to enhance image quality, including high contrast ratios and advanced color management systems, ensuring that visuals are both striking and accurate. The simple user interface allows for seamless navigation, making it easy for educators and presenters to adapt to different presentation needs without technical difficulties.

In summary, the BOXLIGHT CP-320t interactive projector combines brightness, interactivity, and connectivity in a portable, user-friendly package. Designed for modern educational environments, it provides an engaging platform that encourages participation and collaboration, making it an excellent choice for enhancing the teaching and learning experience.
Top Page Image Contents