BOXLIGHT CP-320t Maintenance, AIR Filter Care and Cleaning, Cleaning Projection Lens, TOP Control

Page 41

APPENDIX

MAINTENANCE

WARNING TEMP. INDICATOR

The WARNING TEMP. indicator flashes red when an internal temperature of the projector exceeds the normal temperature. The projector cannot be turned on while the WARNING TEMP. indicator is flashing with the READY indicator off. When the temperature inside the projector returns to normal, the READY indicator lights green. Then you can turn the projector back on. The WARNING TEMP indicator stops flashing after turning the projector on. If the WARNING TEMP indicator continues to flash after turning the projector back on, check the items listed below.

1

Ventilation slots of the projector may be blocked. In such an

TOP CONTROL

event, reposition the projector so that the Ventilation slots cannot

 

be obstructed.

2

The Air filter may be clogged with dust particles. Clean the Air

filter by following the section "AIR FILTER CARE AND

 

CLEANING" below.

3

If the WARNING TEMP. indicator remains on after performing

the above checks, the Cooling fans or the internal circuits may

be malfunctioning. In that case, call Boxlight at 1-800-762-5757 or 360-779-7901 for service.

 

G

RNIN

WA

P.

TEM

 

 

 

P

 

 

M

 

 

A

 

 

 

E

L

 

 

 

 

 

 

 

 

C

 

 

 

A

 

 

 

L

 

 

 

P

 

 

 

E

 

 

 

 

R

 

 

 

 

 

VOLUME –

Warning Temp. indicator

AIR FILTER CARE AND CLEANING

Removable Air Filter prevents dust from accumulating on the surface of the Projection Lens and Projection Mirror. Should the Air Filter become clogged with dust particles, it will reduce Cooling Fans’ effectiveness and may result in internal heat build up and adversely affect the life of the projector. Clean the Air Filter following the steps below:

1

Turn off the projector, and disconnect AC power cord from the

 

AC outlet.

2

Turn the projector upside down and remove the Air Filter by

 

pulling the latches upward.

3

Clean the Air Filter with a brush or wash out dust and particles.

4

Replace the Air Filter properly. Make sure that the Air Filter is

 

fully inserted.

CAUTION

Do not operate the projector with the Air Filter removed. Dust may accumulate on the LCD Panel and the Projection Mirror degrading picture quality.

Do not put small parts into the Air Intake Vents. It may result in malfunction of the projector.

AIR FILTER

Pull up and remove.

RECOMMENDATION

We recommend avoiding dusty/smoky environments when operating a projector. Usage in these environments may cause poor image quality.

When using under dusty or smoky conditions, dust may accumulate on a lens, liquid crystal panels, or optical elements inside the projector. This condition may degrade the quality of a projected image.

When the above symptoms are noticed, contact Boxlight at 1-800-762-5757 or 360-779-7901 for proper cleaning.

CLEANING PROJECTION LENS

Follow these steps to clean the Projection Lens:

1

Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner.

 

Abrasive cleaners, solvents or other harsh chemicals might scratch a surface.

2

3

Lightly wipe a cleaning cloth over the Projection Lens.

When the projector is not in use, replace the Lens Cover.

41

Image 41
Contents Boxlight CP-320t To the Owner Voor de klanten in Nederland Safety InstructionsFederal Communication Commission Notice CompliancesTable of Contents Computers Features and DesignColor Systems Component VideoName of Each Part of Projector PreparationConnecting AC Power Cord SETTING-UP ProjectorFor Continental Europe For the U.S.A. and CanadaRoom Light Adjustable FeetPreparation Positioning Projector Moving Projector Preparation Installing Projector in Proper PositionTerminals of Projector Connecting ProjectorVideo Input Jack Audio Input Jacks Computer Input DIGITAL/ANALOGTerminals Projector Connecting to ComputerTerminals Connecting to Video EquipmentDIP Switch in the Battery Compartment Operation of Remote ControlBefore Operation Laser Pointer FunctionRemote Control Batteries Installation Lamp Replace Indicator TOP Controls and IndicatorsFlow of ON-SCREEN Menu Operation HOW to Operate ON-SCREEN MenuOperating ON-SCREEN Menu Guide Window Before Operation Menu BARBasic Operation Lamp modeTurning on / OFF Projector Turning on ProjectorFocus Adjustment Adjusting ScreenKeystone Adjustment Picture Freeze FunctionTimer Function Sound AdjustmentBasic Operation No Show Function Direct OperationRGB Selecting Input SourceRGB Scart RGB Digital RGB Analog Input MenuComputer Input Selecting Computer SystemSelect Computer System Manually SvgaResolution Computer Input Compatible Computer SpecificationsFreq KHzAuto PC Adjustment PC AdjustmentPC Adjust Menu Auto PC AdjComputer Input Manual PC Adjustment Full screen Display areaDisplay area H Image Level Select Direct Picture Image AdjustmentsImage Level Select Menu Image 1~4Image Adjust Menu Computer Input Image Level AdjustmentScreen Menu Picture Screen AdjustmentVideo Video InputSelecting Video System Component Video Signal FormatPAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-N AV System Menu Video or S-VIDEOImage button Standard Cinema CinemaVideo Input Image Level Adjustment Reset all adjustment to their previous figure Setting Menu SettingSetting Menu To change the code of the Projector To change the code of the Remote ControlReset the Lamp Replace Counter Lamp ReplacementAppendix Lamp ReplaceAppendix Lamp Replace Counter Lamp Handling PrecautionsOperating Wireless Mouse Operating Wireless MouseInstallation AIR Filter Care and Cleaning MaintenanceCleaning Projection Lens TOP ControlTroubleshooting Wireless Mouse Remote Control doesNot work Function does notAppendix Indicators and Projector Condition Indicators Projector ConditionTechnical Specifications Terminal HDB15-PIN Pin Configuration Appendix Configurations of TerminalsComputer INPUT/MONITOR Output Terminal Analog DVI-I Terminal DIGITAL/ANALOGOptional Parts Limited Warranty

CP-320t specifications

The BOXLIGHT CP-320t is a versatile and powerful interactive projector designed to enhance the learning and collaboration experience in various educational settings. Engineered with advanced technology, this projector aims to transform traditional teaching methods through captivating and engaging presentations.

One of the standout features of the CP-320t is its impressive brightness, boasting up to 3,200 ANSI lumens. This high level of brightness ensures vivid and clear images, making it ideal for use in well-lit classrooms or meeting rooms. The projector supports a native resolution of XGA (1024 x 768), delivering sharp details and vibrant colors that help facilitate effective communication.

The CP-320t incorporates an interactive capability that allows users to directly engage with projected content. The dual pen feature supports multiple users simultaneously, making it perfect for group activities and collaborative projects. This interactivity encourages student participation and fosters a more dynamic learning environment. Additionally, the projector offers touchscreen functionality, enabling gestures like tapping and swiping, reminiscent of using a tablet.

In terms of connectivity, the BOXLIGHT CP-320t excels with multiple inputs, including HDMI, VGA, and USB. This versatility allows for easy connectivity with various devices, such as laptops, tablets, and document cameras. The projector also features integrated speakers, providing clear audio to support multimedia presentations without the need for external sound systems.

Another notable characteristic of the CP-320t is its portability. Weighing only a few pounds, it can easily be transported between classrooms or offices. It also includes a long lamp life of up to 10,000 hours in eco mode, which significantly reduces maintenance costs and downtime, making it a cost-effective choice for schools and businesses.

The projector is equipped with the latest technologies to enhance image quality, including high contrast ratios and advanced color management systems, ensuring that visuals are both striking and accurate. The simple user interface allows for seamless navigation, making it easy for educators and presenters to adapt to different presentation needs without technical difficulties.

In summary, the BOXLIGHT CP-320t interactive projector combines brightness, interactivity, and connectivity in a portable, user-friendly package. Designed for modern educational environments, it provides an engaging platform that encourages participation and collaboration, making it an excellent choice for enhancing the teaching and learning experience.