BOXLIGHT CP-320t manual Lamp Handling Precautions, Appendix Lamp Replace Counter

Page 39

APPENDIX

LAMP REPLACE COUNTER

Be sure to reset the Lamp Replace Counter after the Lamp Assembly is replaced. When the Lamp Replace Counter is reset, the LAMP REPLACE Indicator stops lighting.

1

Turn the projector on, press the MENU button and the ON-

 

SCREEN MENU will appear. Press the POINT LEFT/RIGHT

 

button(s) to move the red frame pointer to the SETTING

 

Menu icon (refer to page 36, 37).

2

Press the POINT DOWN button to move the red frame

 

pointer to “Lamp counter reset” and then press the SELECT

 

button. The message "Lamp replace counter reset?" is

 

displayed. Move the pointer to [Yes] and then press the

 

SELECT button.

3

Another confirmation dialog box appears and select [Yes] to

 

reset the Lamp Replace Counter.

Move the pointer to Lamp counter reset and then press the SELECT button. The message “Lamp replace counter reset?” is displayed.

NOTE : Do not reset the Lamp Replace Counter before the Projection Lamp is replaced.

LAMP HANDLING PRECAUTIONS

This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard.

●Lamp lifetime may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same lifetime for each lamp. Some lamps may fail or terminate their lifetime in a shorter period of time than other similar lamps.

●If the projector indicates that the lamp should be replaced, i.e., if the LAMP REPLACE INDICATOR lights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down.

( Follow carefully the instructions in the LAMP REPLACEMENT section of this manual. ) Continuous use of the lamp with the LAMP REPLACE INDICATOR lighted may increase the risk of lamp explosion.

●A Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its lifetime draws to an end. Risk of explosion may differ according to the environment or conditions in which the projector and lamp are being used.

IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE TAKEN.

If a lamp explodes, disconnect the projector’s AC plug from the AC outlet immediately. Contact an authorized service station for a checkup of the unit and replacement of the lamp. Additionally, check carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out from the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No one should check the inside of the projector except those who are authorized trained technicians and who are familiar with projector service. Inappropriate attempts to service the unit by anyone, especially those who are not appropriately trained to do so, may result in an accident or injury caused by pieces of broken glass.

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Boxlight CP-320t To the Owner Voor de klanten in Nederland Safety InstructionsFederal Communication Commission Notice CompliancesTable of Contents Component Video Features and DesignComputers Color SystemsName of Each Part of Projector PreparationFor the U.S.A. and Canada SETTING-UP ProjectorConnecting AC Power Cord For Continental EuropeAdjustable Feet Preparation Positioning ProjectorRoom Light Moving Projector Preparation Installing Projector in Proper PositionComputer Input DIGITAL/ANALOG Connecting ProjectorTerminals of Projector Video Input Jack Audio Input JacksTerminals Projector Connecting to ComputerTerminals Connecting to Video EquipmentLaser Pointer Function Operation of Remote ControlDIP Switch in the Battery Compartment Before OperationRemote Control Batteries Installation Lamp Replace Indicator TOP Controls and IndicatorsHOW to Operate ON-SCREEN Menu Operating ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Guide Window Before Operation Menu BARTurning on Projector Lamp modeBasic Operation Turning on / OFF ProjectorPicture Freeze Function Adjusting ScreenFocus Adjustment Keystone AdjustmentDirect Operation Sound AdjustmentTimer Function Basic Operation No Show FunctionInput Menu Selecting Input SourceRGB RGB Scart RGB Digital RGB AnalogSvga Selecting Computer SystemComputer Input Select Computer System ManuallyKHz Computer Input Compatible Computer SpecificationsResolution FreqAuto PC Adj PC AdjustmentAuto PC Adjustment PC Adjust MenuComputer Input Manual PC Adjustment Display area Display area HFull screen Image 1~4 Picture Image AdjustmentsImage Level Select Direct Image Level Select MenuImage Adjust Menu Computer Input Image Level AdjustmentScreen Menu Picture Screen AdjustmentVideo Video InputAV System Menu Video or S-VIDEO Component Video Signal FormatSelecting Video System PAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-NImage button Standard Cinema CinemaVideo Input Image Level Adjustment Reset all adjustment to their previous figure Setting Setting MenuSetting Menu To change the code of the Projector To change the code of the Remote ControlLamp Replace Lamp ReplacementReset the Lamp Replace Counter AppendixAppendix Lamp Replace Counter Lamp Handling PrecautionsOperating Wireless Mouse InstallationOperating Wireless Mouse TOP Control MaintenanceAIR Filter Care and Cleaning Cleaning Projection LensTroubleshooting Function does not Remote Control doesWireless Mouse Not workAppendix Indicators and Projector Condition Indicators Projector ConditionTechnical Specifications DVI-I Terminal DIGITAL/ANALOG Appendix Configurations of TerminalsTerminal HDB15-PIN Pin Configuration Computer INPUT/MONITOR Output Terminal AnalogOptional Parts Limited Warranty

CP-320t specifications

The BOXLIGHT CP-320t is a versatile and powerful interactive projector designed to enhance the learning and collaboration experience in various educational settings. Engineered with advanced technology, this projector aims to transform traditional teaching methods through captivating and engaging presentations.

One of the standout features of the CP-320t is its impressive brightness, boasting up to 3,200 ANSI lumens. This high level of brightness ensures vivid and clear images, making it ideal for use in well-lit classrooms or meeting rooms. The projector supports a native resolution of XGA (1024 x 768), delivering sharp details and vibrant colors that help facilitate effective communication.

The CP-320t incorporates an interactive capability that allows users to directly engage with projected content. The dual pen feature supports multiple users simultaneously, making it perfect for group activities and collaborative projects. This interactivity encourages student participation and fosters a more dynamic learning environment. Additionally, the projector offers touchscreen functionality, enabling gestures like tapping and swiping, reminiscent of using a tablet.

In terms of connectivity, the BOXLIGHT CP-320t excels with multiple inputs, including HDMI, VGA, and USB. This versatility allows for easy connectivity with various devices, such as laptops, tablets, and document cameras. The projector also features integrated speakers, providing clear audio to support multimedia presentations without the need for external sound systems.

Another notable characteristic of the CP-320t is its portability. Weighing only a few pounds, it can easily be transported between classrooms or offices. It also includes a long lamp life of up to 10,000 hours in eco mode, which significantly reduces maintenance costs and downtime, making it a cost-effective choice for schools and businesses.

The projector is equipped with the latest technologies to enhance image quality, including high contrast ratios and advanced color management systems, ensuring that visuals are both striking and accurate. The simple user interface allows for seamless navigation, making it easy for educators and presenters to adapt to different presentation needs without technical difficulties.

In summary, the BOXLIGHT CP-320t interactive projector combines brightness, interactivity, and connectivity in a portable, user-friendly package. Designed for modern educational environments, it provides an engaging platform that encourages participation and collaboration, making it an excellent choice for enhancing the teaching and learning experience.
Top Page Image Contents