BOXLIGHT CP-15t Important Safety Instructions, Plug into the outlet, contact your, Type plug

Page 3

IMPORTANT SAFETY INSTRUCTIONS

All the safety and operating instructions should be read before the product is operated.

Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.

Do not use attachments not recommended by the manufacturer as they may cause hazards.

Do not place this projector on an unstable cart, stand, or table. The projector may fall, causing serious injury to a child or adult, and serious damage to the projector. Use only with a cart or stand recommended by the manufacturer, or sold with the projector. Wall of shelf mounting should follow the manufacturer's instructions, and should use a mounting kit approved by the manufacturers.

Do not expose this unit to rain or use near water... for

example, in a wet basement, near a swimming pool, etc...

Slots and openings in the back and bottom of the cabinet are provided for ventilation, to insure reliable operation of the equipment and to protect it from overheating.

The openings should never be covered with cloth of other materials, and the bottom opening should not be blocked by placing the projector on a bed, sofa, rug, or other similar surface. This projector should never be placed near or over a radiator or heat register.

This projector should not be placed in a built-in installation such as a book case unless proper ventilation is provided.

This projector should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied, consult your authorized dealer or local power company.

Do not overload wall outlets and extension cords as this can result in fire or electric shock. Do not allow anything to rest on the power cord. Do not locate this projector where the cord may be damaged by persons walking on it.

Never push objects of any kind into this projector through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the projector.

Do not attempt to service this projector yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

Unplug this projector from wall outlet and refer servicing to qualified service personnel under the following conditions:

a.When the power cord or plug is damaged or frayed.

b.If liquid has been spilled into the projector.

c.If the projector has been exposed to rain or water.

d. If the projector does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the projector to normal operation.

e. If the projector has been dropped or the cabinet has been damaged.

f. When the projector exhibits a distinct change in performance-this indicates a need for service.

When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or injury to persons.

Upon completion of any service or repairs to this projector, ask the service technician to perform routine safety checks to determine that the projector is in safe operating condition.

 

This projector is equipped with a

 

grounding type AC line plug.

 

Should you be unable to insert the

 

plug into the outlet, contact your

 

electrician. Do not defeat the

GROUND

safety purpose of this grounding

type plug.

 

Follow all warnings and instructions marked on the projectors.

For added protection to the projector during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage due to lightning and power line surges.

An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

If the projector is to be built into a compartment or similarly enclosed, the minimum distances must be maintained.

Do not cover the ventilation slot on the projector.

Heat build-up can reduce the service life of your projector, and can also be dangerous.

20cm

WALL

 

PROJECTOR

PROJECTOR

 

(FRONT)

(SIDE)

50cm

50cm

50cm

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Boxlight Safety Precautions To the OwnerRisk of Electric Shock Do not Open Electrician. Do not defeat Important Safety InstructionsSafety purpose of this grounding Plug into the outlet, contact yourTable of Contents Compatibility Features and DesignName of Each Part of the Projector PreparationSETTING-UP the Projector Adjustable FeetPositioning the Projector Preparation Connecting the AC Power Cord VentilationProjector side Female AC outlet side Male Moving the Projector Terminals of the Projector Connecting the ProjectorConnecting the Projector Connecting to the Video EquipmentIBM-COMPATIBLE Computers VGA / Svga / XGA / Sxga Connecting to the IBM-COMPATIBLE ComputerControl Port Audio Audio OUT Monitor OUT MCI Serial Computer Audio Speaker Stereo Audio Amplifier Monitor Output Connection to the Macintosh ComputerDesktop type Monitor To the MonitorMode 1152 x Mode 640 xMode 832 x Mode 1024 xOperation of the Remote Control Before OperationLaser Pointer button Operating Range of the Remote Control Remote Control Batteries InstallationTOP Controls and Indicators HOW to Operate ON-SCREEN Menu Operating ON-SCREEN MenuFlow of ON-SCREEN Menu Before Operation Menu BAR View Menu Used to adjust Position Size Image Refer to P36Turning off the Projector Basic OperationsTurning on / OFF the Projector Turning on the ProjectorPicture Freeze / no Show Function Adjusting the ImageZoom Adjustment Focus AdjustmentSound Adjustment Direct OperationMenu Operation Automatic Multiscanning system Computer ModeSelecting Computer Mode Selecting Computer SystemQuit PC AdjustmentReset StoredCompatible Computer Specifications FreqKHz Adjust Picture Image Manually Picture Image AdjustmentPosition Auto Image FunctionNormal Function NormalCompress function Picture Position AdjustmentPicture Screen Adjustment Expand functionVideo Mode Selecting Video ModeSelecting Color System Wide Adjusting the Picture ImageColor Tint Contrast Brightness Sharpness RegularAvailable Data MCI ModeHow to Load a PC Card Into the Projector Operating the PC Card SlotIndex Selection MCI ModeShow the Data in the Memory Card Display Data on ScreenWill be displayed on the screen for a few seconds Box Write Data Into Memory Card Access to the Card with the ProjectorInstall / Remove the SmartMedia Smartmedia and PC Card AdapterPC Card Adapter supplied SmartMedia supplied Eject button Precautions and Specifications of the appliance SmartMediaPC Card Adapter Setting Setting MenuSetting Language Appendix Operating Wireless MouseInstallation Controlling Wireless MouseMaintenance Temperature Warning IndicatorAIR Filter Care and Cleaning Cleaning the Projection Lens Lamp Replacement IndicatorLamp Replacement Lamp Replacement Monitor TimerProblem Try these Solution TroubleshootingRemote Control Technical Specifications Page Boxlight

CP-15t specifications

The BOXLIGHT CP-15t is a state-of-the-art educational tool designed to enhance the teaching and learning experience in classrooms and training environments. This interactive projector incorporates advanced technologies to provide educators with a versatile and user-friendly solution for presenting lessons, videos, and other educational materials.

One of the key features of the BOXLIGHT CP-15t is its impressive brightness level, which reaches up to 3,500 lumens. This high brightness ensures that the projected images remain vivid and clear, even in well-lit classrooms. With a native resolution of 1280 x 800 pixels, the projector delivers sharp and detailed visuals, making it ideal for displaying presentations, graphs, and educational content with precision.

The BOXLIGHT CP-15t utilizes DLP (Digital Light Processing) technology, which not only enhances image quality but also promotes longevity and reliability. DLP projectors are known for their high contrast ratios, ensuring that colors appear rich and vibrant, while black levels are deep. This results in a more engaging visual experience for both teachers and students.

Additionally, the CP-15t is equipped with a variety of connectivity options, including HDMI, VGA, USB, and audio inputs. This extensive range allows users to easily connect laptops, document cameras, tablets, and other devices, making it a highly adaptable tool for modern classrooms. The projector also supports wireless capabilities, enabling seamless streaming and sharing of content without the need for cumbersome cables.

Another standout feature of the BOXLIGHT CP-15t is its interactive capabilities. When paired with the right software, this projector can transform any flat surface into an interactive touchscreen. Teachers can write, draw, and annotate directly on the projected image, facilitating dynamic discussions and enhancing student engagement.

Furthermore, the CP-15t's compact and portable design makes it easy to transport between classrooms or training locations. Its long lamp life, which can extend up to 20,000 hours, ensures that the projector remains operational for an extended period, reducing maintenance costs and downtime.

In summary, the BOXLIGHT CP-15t is a remarkable interactive projector that combines high brightness, advanced DLP technology, versatile connectivity, and interactive features to create an innovative teaching tool. Its ability to deliver exceptional image quality and interactive engagement makes it a valuable asset for educators aiming to inspire and educate their students effectively.
Top Page Image Contents