BOXLIGHT CP-15t manual Troubleshooting, Problem Try these Solution

Page 44

APPENDIX

TROUBLESHOOTING

Before calling your dealer or Boxlight for assistance, check the troubleshooting tips below.

1.Make sure you have connected the projector to your equipment as described in the section "CONNECTING THE PROJECTOR" on pages 10 ~ 15.

2.Check cable connection. Verify that all computer, video and power cord are properly connected.

3.Verify that all power is switched on.

4.If the projector still does not produce the image, re-start the computer.

5.If the image still does not appear, unplug the projector from the computer and check the computer monitor's display. The problem may be with your graphics controller rather than with the projector. (When you reconnect the projector, remember to turn the computer and monitor off before your power up the projector. Power the equipment on in their order of : Projector and computer.)

6.If the problem still exists, check with following chart.

Problem:

Try these Solution

No power.

Plug the projector into the AC outlet.

 

Be sure READY Indicator light is On.

 

Wait one minute after the projector is turned OFF before turning the projector back

 

on.

 

NOTE : After pressing the power ON-OFF switch to OFF, make sure the projector

 

works as follow.

 

1. The LAMP indicator will light and the READY indicator will turn off.

 

2. After one minute, the READY indicator will light green again and the projector may

 

be turned on by pressing the power ON-OFF button.

 

Check the TEMPERATURE WARNING indicator. If the indicator flashes red, the

 

projector cannot be turned on.

 

(See "TURNING ON/OFF THE PROJECTOR" section on page 22.)

 

Check the Projection Lamp. (Refer to page 43.)

 

 

Image is out of

Adjust the focus

focus.

Make sure the projection screen is at least 4.6’ (1.4m) from the projector.

Check the projection lens to see if it needs cleaning.

 

 

NOTE : Moving the projector from a cool temperature location to a warm temperature

 

location may result in moisture condensation on the lens. In such an event,

 

leave the projector OFF an d wait until condensation disappears.

 

 

Picture is Left /

Check Ceiling / Rear feature. (See “SETTING” section on page 40.)

Right reversed.

 

Picture is Top /

Check Ceiling feature. (See “SETTING” section on page 40.)

Bottom reversed.

 

Some displays are

Check Display feature.(See “SETTING” section on page 40.)

not seen during the

 

Operation.

 

 

 

No image.

Check the connection between the computer or video equipment and the projector.

 

When turning the projector on, it takes about 30 seconds to display the image.

 

Check that the system you selected is corresponding to the computer or the video

 

equipment.

 

Make sure the temperature is not out of the Operating Temperature (5° ~ 35°).

 

 

No sound.

Check audio cable connection from audio input source.

 

Adjust the audio source.

 

Press VOLUME (+) button.

 

Press MUTE button.

 

 

44

Image 44
Contents Boxlight Risk of Electric Shock Do not Open Safety PrecautionsTo the Owner Important Safety Instructions Safety purpose of this groundingPlug into the outlet, contact your Electrician. Do not defeatTable of Contents Features and Design CompatibilityPreparation Name of Each Part of the ProjectorPositioning the Projector SETTING-UP the ProjectorAdjustable Feet Projector side Female AC outlet side Male Preparation Connecting the AC Power CordVentilation Moving the Projector Connecting the Projector Terminals of the ProjectorConnecting to the Video Equipment Connecting the ProjectorConnecting to the IBM-COMPATIBLE Computer IBM-COMPATIBLE Computers VGA / Svga / XGA / SxgaControl Port Audio Audio OUT Monitor OUT MCI Serial Computer Connection to the Macintosh Computer Desktop typeMonitor To the Monitor Audio Speaker Stereo Audio Amplifier Monitor OutputMode 640 x Mode 832 xMode 1024 x Mode 1152 xLaser Pointer button Operation of the Remote ControlBefore Operation Remote Control Batteries Installation Operating Range of the Remote ControlTOP Controls and Indicators Flow of ON-SCREEN Menu HOW to Operate ON-SCREEN MenuOperating ON-SCREEN Menu Before Operation Menu BAR Used to adjust Position Size Image Refer to P36 View MenuBasic Operations Turning on / OFF the ProjectorTurning on the Projector Turning off the ProjectorAdjusting the Image Zoom AdjustmentFocus Adjustment Picture Freeze / no Show FunctionMenu Operation Sound AdjustmentDirect Operation Computer Mode Selecting Computer ModeSelecting Computer System Automatic Multiscanning systemPC Adjustment ResetStored QuitKHz Compatible Computer SpecificationsFreq Picture Image Adjustment Adjust Picture Image ManuallyAuto Image Function Normal FunctionNormal PositionPicture Position Adjustment Picture Screen AdjustmentExpand function Compress functionSelecting Color System Video ModeSelecting Video Mode Adjusting the Picture Image Color Tint Contrast Brightness SharpnessRegular WideMCI Mode How to Load a PC Card Into the ProjectorOperating the PC Card Slot Available DataMCI Mode Show the Data in the Memory CardDisplay Data on Screen Index SelectionWill be displayed on the screen for a few seconds Box Access to the Card with the Projector Write Data Into Memory CardPC Card Adapter supplied SmartMedia supplied Eject button Install / Remove the SmartMediaSmartmedia and PC Card Adapter PC Card Adapter Precautions and Specifications of the applianceSmartMedia Setting Language SettingSetting Menu Operating Wireless Mouse InstallationControlling Wireless Mouse AppendixAIR Filter Care and Cleaning MaintenanceTemperature Warning Indicator Lamp Replacement Indicator Lamp ReplacementLamp Replacement Monitor Timer Cleaning the Projection LensTroubleshooting Problem Try these SolutionRemote Control Technical Specifications Page Boxlight

CP-15t specifications

The BOXLIGHT CP-15t is a state-of-the-art educational tool designed to enhance the teaching and learning experience in classrooms and training environments. This interactive projector incorporates advanced technologies to provide educators with a versatile and user-friendly solution for presenting lessons, videos, and other educational materials.

One of the key features of the BOXLIGHT CP-15t is its impressive brightness level, which reaches up to 3,500 lumens. This high brightness ensures that the projected images remain vivid and clear, even in well-lit classrooms. With a native resolution of 1280 x 800 pixels, the projector delivers sharp and detailed visuals, making it ideal for displaying presentations, graphs, and educational content with precision.

The BOXLIGHT CP-15t utilizes DLP (Digital Light Processing) technology, which not only enhances image quality but also promotes longevity and reliability. DLP projectors are known for their high contrast ratios, ensuring that colors appear rich and vibrant, while black levels are deep. This results in a more engaging visual experience for both teachers and students.

Additionally, the CP-15t is equipped with a variety of connectivity options, including HDMI, VGA, USB, and audio inputs. This extensive range allows users to easily connect laptops, document cameras, tablets, and other devices, making it a highly adaptable tool for modern classrooms. The projector also supports wireless capabilities, enabling seamless streaming and sharing of content without the need for cumbersome cables.

Another standout feature of the BOXLIGHT CP-15t is its interactive capabilities. When paired with the right software, this projector can transform any flat surface into an interactive touchscreen. Teachers can write, draw, and annotate directly on the projected image, facilitating dynamic discussions and enhancing student engagement.

Furthermore, the CP-15t's compact and portable design makes it easy to transport between classrooms or training locations. Its long lamp life, which can extend up to 20,000 hours, ensures that the projector remains operational for an extended period, reducing maintenance costs and downtime.

In summary, the BOXLIGHT CP-15t is a remarkable interactive projector that combines high brightness, advanced DLP technology, versatile connectivity, and interactive features to create an innovative teaching tool. Its ability to deliver exceptional image quality and interactive engagement makes it a valuable asset for educators aiming to inspire and educate their students effectively.