GE 49-60639 About ClimateKeeper2, About CustomCool.on some models, Troubleshooting Tips

Operating Instructions Safety Instructions

Installation Instructions

Troubleshooting Tips

About ClimateKeeper2.™

How it Works

	The new ClimateKeeper2™ is the industry’s	fruit, salads, rice, etc., can now be stored on
	most advanced refrigeration system,	open shelves without excessive moisture loss.
	delivering optimum temperature and	Due to the higher humidity in the refrigerator,
	humidity performance to keep food	you may on occasion experience fog or small
	garden fresh longer and reduce freezer	amounts of moisture in the refrigerator
	burn, while maintaining E star-level efficiency.	compartment. This is normal and may
	The new ClimateKeeper2 system features	come and go as different food loads
	two evaporators—one for the refrigerator	and environmental conditions change.
	and one for the freezer.	Wipe dry with a paper towel if desired.
	This provides two separate cooling systems	The separate airflow system minimizes
	for the entire unit, and separates the airflow	the mixing of air between the two
	between the fresh food and freezer sections	compartments, which reduces odor
	during normal cooling operations.	transfer to improve the taste of ice.
	This ensures that the humidity levels in the	The ClimateKeeper2 system also reduces
	fresh food section are significantly higher	the number of defrosting cycles in the freezer
	than in a conventional system,* allowing	evaporator, thereby reducing freezer burn.
	fresh produce and other unsealed foods to	*Testing shows a higher level of humidity in
	retain their moisture content and freshness	the Fresh Food section in ClimateKeeper2
	longer. Moisture sensitive foods such as fresh	refrigerators versus conventional units.
About CustomCool.™(on some models)
	How to Use
	Empty the pan. Place the Chill/Thaw tray	For Non-LCD Models:
	in the pan. Place the items on the tray	Tap that feature’s pad until no options
	and close the pan completely.	are selected and the display is off.
	LCD Models:	 During ExpressThaw and
	Access by: Home > Options >	ExpressChill,the display on the
	Refrigerator Options > CustomCool Pan	controls will count down the time
ExpressThaw™	Non-LCD Models:	in the cycle (on some models).
		 After the ExpressThaw cycle is
	Select the ExpressThaw™, ExpressChill™
		complete, the pan will reset to the
	or SelectTemp™ pad. The display and SET
		MEAT setting (32°F [0°C]) to help
	light will come on. Tap the pad until the
		preserve thawed items until they
	light appears next to the desired setting.
		are used.
	Use the following chart to determine the
		 The displayed actual temperature
	best setting to use.
		of the CustomCool pan may vary
	 ExpressChill can be set to 15, 30 or 45
		slightly from the SET temperature
	minutes. The default is 15 minutes.	based on usage and operating
	 To stop a feature before it is finished:	environment.
ExpressChill™	For LCD Models:	NOTE: For food safety reasons, it is

Go into that feature’s menu and press	recommended that foods be wrapped in
	plastic wrap when using ExpressThaw.
the OFF button.
	This will help contain meat juices and improve
	thawing performance.
How to Remove and Replace the Drawer

Consumer Support

To remove:

Pull the drawer out to the stop position.

Rotate all four swing locks to the unlock position.

Lift the front of the drawer up and out.

To replace:

Make sure all four swing locks are in

the unlock position.

Place the sides of the drawer into

6the drawer supports, making sure the swing locks fit on the drawer slots.

Lock all four swing locks by rotating them to the lock position.