Installation Instructions

MOVING THE REFRIGERATOR

1LOADING THE REFRIGERATOR ONTO A HAND TRUCK

Leave all tape and door pads on doors until the refrigerator is in its final location.

To move the refrigerator, use a padded hand truck. Center the refrigerator on the hand truck and secure the strap around the refrigerator.

DO NOT OVERTIGHTEN THE STRAP.

2REMOVE THE BASE GRILLE

Remove the grille by removing the two Phillips head screws.

If the refrigerator must go through

any entrance that is less than 38wide, the doors must be removed. Proceed to Step 3.

DO NOT remove the handles.

If all entrances are more than 38wide, skip to Installing the Refrigerator.

3DISCONNECT THE WATER COUPLING (on some models)

If the refrigerator has a water dispenser, there is a water line from the cabinet into the bottom hinge on the freezer door that must be disconnected.

To disconnect, push in on the white collar of the coupling and pull out the tubing.

White collar

Bottom freezer hinge

22

Page 22
Image 22
GE PSHS6MGZSS, 49-60639, 200D8074P046 Moving the Refrigerator, Remove the Base Grille, Do not remove the handles