DIMENSIONS AND SPECIFICATIONS

(for 23‘ CustomStyle™models)

DIMENSIONS AND SPECIFICATIONS
26
Installation Instructions
INSTALLING THE REFRIGERATOR

REFRIGERATOR LOCATION

• Do not install the refrigerator where the
temperature will go below 60°F (16°C) because
it will not run often enough to maintain proper
temperatures.
• Do not install the refrigerator where the
temperature will go above 100°F (37°C) because
it will not perform properly.
• Install it on a floor strong enough to support it
fully loaded.

CLEARANCES

Allow the following clearances for ease
of installation, proper air circulation and plumbing
and electrical connections:
23‘ (33” wide),
23‘/25‘ CustomStyle™25‘, 26‘
Sides 1/8”(4 mm) 1/8”(4 mm)
Top 1”(25 mm) 1”(25 mm)
Back 1/2”(13 mm) 1”(25 mm)
701⁄4”(178.4
cm)
36”
(91.4 cm)
24” (61 cm)
24”(61 cm)
Cabinet
Water Electrical
3/4”(19 mm)
Airspace
(1/2”[13 mm] Gap +
1/4”[6 mm] Wall
Plates)
25”(63.5 cm)
Countertop

DIMENSIONS AND SPECIFICATIONS

(for 25‘ CustomStyle™models)

*721/4”(183.5 cm) required for full adjustment
of mobility wheels. If cabinets installed above
refrigerator have doors that are flush to the top of
the opening for the refrigerator, then an
additional 1/8”may be required to provide
clearance for cabinet doors to open freely.
36”
(91.4 cm)
24” (61 cm)
721⁄4”(183.5 cm)*