BenQ MP624, MP623 user manual Magnifying and searching for details, Correcting keystone

Page 30

Correcting keystone

Keystoning refers to the situation where the projected image is noticeably wider at either the top or bottom. It occurs when the projector is not perpendicular to the screen.

To correct this, besides adjusting the height of the projector, you will need to manually correct it following one of these steps.

Using the remote control

Press / on the projector or remote control to display the Keystone correction page. Press to correct keystoning at the top of the image. Press to correct keystoning at the bottom of the image.

• Using the OSD menu

1. Press Menu/Exit and then press / until the DISPLAY menu is highlighted.

2.

Press

to highlight Keystone and press

 

 

 

 

Mode/Enter. The Keystone correction page Press / .

 

Press

/ .

 

displays.

 

 

 

 

 

 

 

 

 

3. Press to correct keystoning at the top of the image or press to correct keystoning at the bottom of the image.

Magnifying and searching for details

If you need to find the details on the projected picture, magnify the picture. Use the direction arrow keys for navigating the picture.

Using the remote control

1.Press Digital Zoom +/- to display the Zoom bar.

2. Press Digital Zoom + to magnify the center of the picture. Press the key repeatedly until the picture size is suitable for your need.

3. Use the directional arrows (, , , ) on the projector or remote control to navigate the picture.

4.To restore the picture to its original size, press

AUTO. You can also press Digital Zoom -. When the key is pressed again, the picture is further reduced until it is restored to the original size.

Using the OSD menu

1.Press Menu/Exit and then press / until the DISPLAY menu is highlighted.

2.Press to highlight Digital Zoom and press Mode/Enter. The Zoom bar displays.

3.Repeat steps 2-4in the section of "Using the remote control" above. Or if you are using the projector control panel, continue to the following steps.

4.Press on the projector repeatedly to magnify the picture to a desired size.

5.To navigate the picture, press Mode/Enter to switch to the paning mode and press the directional arrows (, , , ) to navigate the picture.

30 Operation

Image 30
Contents Welcome MP623/MP624 Digital ProjectorTable of contents Future reference Projector lamp is on Important safety instructionsRefer servicing to qualified service personnel Do not look straight at the projectorSafety Instructions Do not block the ventilation holes Ceiling mounting the projector This Apparatus Must be EarthedProjector features IntroductionIntroduction Shipping contents Projector exterior view Front/upper sideRear/lower side Controls and functions ProjectorRemote control Pull out the battery holder Remote control effective rangeReplacing the remote control battery Operating the projector from the rearPositioning your projector Choosing a locationObtaining a preferred projected image size Page Projection dimensions Connection Connecting a computer or monitorConnecting a computer To connect the projector to a notebook or desktop computerConnecting a monitor To connect the projector to a monitorBest video quality Connecting Video source devicesConnecting audio Better video qualityConnecting an Hdmi device To connect the projector to an Hdmi deviceConnecting a Component Video source device To connect the projector to a Component Video source deviceConnecting an S-Video source device To connect the projector to an S-Video source deviceConnecting a composite Video source device To connect the projector to a composite Video source deviceStarting up the projector Heard. The Power indicator light flashesOperation OperationUsing the menus Use / to highlight the System Setup Basic menuIf you forget the password Utilizing the password functionSetting a password Security SettingsDisabling the password function Entering the password recall procedureChanging the password Enter a new passwordSwitching input signal Changing color spaceAuto-adjusting the image Adjusting the projected imageAdjusting the projection angle Fine-tuning the image size and clarityMagnifying and searching for details Correcting keystoneSelecting the aspect ratio About the aspect ratioPC input signals D-Sub / Comp. analog RGB Selecting a picture modePicture modes for different types of signals Optimizing the imageSetting the User 1/User 2 mode Using Wall ColorFine-tuning the image quality in user modes Adjusting BrightnessAdjusting Sharpness Adjusting ColorAdjusting Tint Adjusting Brilliant ColorPress Mode/Enter and the 3D Color Management page displays Setting the presentation timer Top-Left Bottom-Left Top- Right Bottom-RightTo cancel the timer, perform the following steps How to use the Timer On key?Hiding the image Locking control keys Utilizing FAQ functionOr go to the System Setup Basic Panel Freezing the imageTurning off the Power on/off ring tone Adjusting the soundAdjusting the sound level Operating in a high altitude environmentPersonalizing the projector menu display Shutting down the projectorMenu operation Menu systemMain menu Sub-menu Options Basic LanguageAdvanced Description of each menu Timer TemperatureSave Settings Auto Power OffAudio Settings System Setup Basic menu System Setup Advanced menuSleep Timer Menu SettingsReset All Lamp SettingsSettings SecurityInformation menu FAQ-Image InstallationFAQ-Features Service CurrentMaintenance Care of the projectorLamp information Setting Lamp mode as EconomicSetting Auto Power Off Getting to know the lamp hourTiming of replacing the lamp Turn the power off and disconnect Loosen the screw that secures the lamp MaintenanceReplacing the lamp Tighten the screw that secures the lamp Displays. Press to highlight Reset lamp Resetting the lamp timerSetup Advanced Lamp Settings menu Restart the projectorIndicators OrangeOff Red Troubleshooting Specifications Projector specificationsDimensions Timing chartSupported timing for PC input Supported timing for Video and S-Video inputs Resolution ModeSupported timing for Hdmi Hdcp input HorizontalSignal Format Horizontal Frequency kHz Vertical Frequency Hz Supported timing for Component YPbPr inputCopyright Warranty and Copyright informationLimited warranty DisclaimerEEC statement Regulation statementsFCC statement Weee directive

MP624, MP623 specifications

The BenQ MP623 and MP624 are compact and versatile projectors that cater to various presentation needs in both professional and educational settings. These projectors are designed to deliver high-quality visuals coupled with user-friendly features, making them ideal for business meetings, classrooms, and small to medium-sized venues.

One of the standout features of the MP623 and MP624 is their impressive brightness output. With a brightness of up to 2500 ANSI lumens, these projectors ensure clear and vivid images, even in well-lit environments. The 2000:1 contrast ratio further enhances image quality, providing deeper blacks and more vibrant colors, which is essential for creating engaging presentations.

Both models utilize DLP (Digital Light Processing) technology, known for its reliability and high performance. DLP technology minimizes the risk of color degradation over time, maintaining consistent image quality. This technology also enables the projectors to produce sharp images with smooth motion, making them suitable for displaying video content as well as static presentations.

The MP623 and MP624 come equipped with a native resolution of XGA (1024 x 768), which is ideal for displaying standard presentations and graphics. They also support multiple resolutions, allowing for flexibility in different usage scenarios. The projectors are compatible with various input sources, including HDMI, VGA, and composite video, making it easy to connect to laptops, desktops, and other multimedia devices.

Portability is another key characteristic of the MP623 and MP624. Weighing in at just a few kilograms, these projectors are lightweight and easy to transport, perfect for professionals on the go. Their compact design does not compromise on performance, and they can be quickly set up in different environments, from conference rooms to classrooms.

User-friendly features are also prominent in these models. The intuitive menu system and remote control make it simple to navigate through settings and customize presentations. Furthermore, the inclusion of various preset modes allows users to optimize their viewing experience according to the content being displayed, whether it be text, graphics, or video.

In addition to their impressive technology and features, the MP623 and MP624 are designed with longevity in mind. They are equipped with long-lasting lamps, offering extended usage hours and minimizing maintenance costs. The efficient cooling system helps prolong lamp life while ensuring quiet operation, which is critical during presentations.

In conclusion, the BenQ MP623 and MP624 projectors combine portability, high brightness, and advanced DLP technology, making them excellent choices for professionals and educators seeking reliable and versatile projection solutions. With their user-friendly features and quality image output, these projectors are well-suited for a wide range of applications, enhancing presentations in any setting.