BenQ MP623 Using Wall Color, Fine-tuning the image quality in user modes, Adjusting Brightness

Page 33

Setting the User 1/User 2 mode

There are two user-definable modes if the current available picture modes are not suitable for your need. You can use one of the picture modes (except the User 1/User 2) as a starting point and customize the settings.

1.Press Menu/Exit to open the On-Screen Display (OSD) menu.

2.Go to the PICTURE > Picture Mode menu.

3.Press / to select User 1 to User 2.

4.Press to highlight Reference Mode.

This function is only available when User 1 or User 2 mode is selected up in the Picture Mode sub- menu item.

5.Press / to select a picture mode that is closest to your need.

6.Press to select a sub-menu item to be changed and adjust the value with / . See "Fine-tuning the image quality in user modes" below for details.

7.When all settings have been done, highlight Save Settings and press Mode/Enter to store the settings.

8.The confirmation message 'Setting Saved' displays.

Using Wall Color

In the situation where you are projecting onto a colored surface such as a painted wall which may not be white, the Wall Color feature can help correct the projected picture’s color to prevent possible color difference between the source and projected pictures.

To use this function, go to the DISPLAY > Wall Color menu and press / to select a color which is the closest to the color of the projection surface. There are several precalibrated colors to choose from: Light Yellow, Pink, Light Green, Blue, and Blackboard.

Fine-tuning the image quality in user modes

According to the detected signal type, there are some user-definable functions available when User 1 or User 2 mode is selected. You can make adjustments to these functions based on your needs.

Adjusting Brightness

Highlight Brightness in the PICTURE menu and adjust the values by pressing / on the projector or remote control.

The higher the value, the brighter the image. And lower

 

 

 

the setting, darker the image. Adjust this control so the

 

 

 

black areas of the image appear just as black and that

 

 

 

detail in the dark areas is visible.

+30

+50

+70

Adjusting Contrast

Highlight Contrast in the PICTURE menu and adjust the values by pressing / on the projector or remote control.

The higher the value, the greater the contrast. Use this

 

 

 

to set the peak white level after you have previously

 

 

 

adjusted the Brightness setting to suit your selected

 

 

 

input and viewing environment.

+30

0

+30

Operation 33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents MP623/MP624 Digital Projector WelcomeTable of contents Refer servicing to qualified service personnel Important safety instructionsFuture reference Projector lamp is on Do not look straight at the projectorSafety Instructions Do not block the ventilation holes This Apparatus Must be Earthed Ceiling mounting the projectorProjector features IntroductionIntroduction Shipping contents Projector exterior view Front/upper sideRear/lower side Projector Controls and functionsRemote control Replacing the remote control battery Remote control effective rangePull out the battery holder Operating the projector from the rearChoosing a location Positioning your projectorObtaining a preferred projected image size Page Projection dimensions Connecting a computer Connecting a computer or monitorConnection To connect the projector to a notebook or desktop computerTo connect the projector to a monitor Connecting a monitorConnecting audio Connecting Video source devicesBest video quality Better video qualityTo connect the projector to an Hdmi device Connecting an Hdmi deviceTo connect the projector to a Component Video source device Connecting a Component Video source deviceTo connect the projector to an S-Video source device Connecting an S-Video source deviceTo connect the projector to a composite Video source device Connecting a composite Video source deviceOperation Heard. The Power indicator light flashesStarting up the projector OperationUse / to highlight the System Setup Basic menu Using the menusSetting a password Utilizing the password functionIf you forget the password Security SettingsChanging the password Entering the password recall procedureDisabling the password function Enter a new passwordChanging color space Switching input signalAdjusting the projection angle Adjusting the projected imageAuto-adjusting the image Fine-tuning the image size and clarityCorrecting keystone Magnifying and searching for detailsAbout the aspect ratio Selecting the aspect ratioPicture modes for different types of signals Selecting a picture modePC input signals D-Sub / Comp. analog RGB Optimizing the imageFine-tuning the image quality in user modes Using Wall ColorSetting the User 1/User 2 mode Adjusting BrightnessAdjusting Tint Adjusting ColorAdjusting Sharpness Adjusting Brilliant ColorPress Mode/Enter and the 3D Color Management page displays Top-Left Bottom-Left Top- Right Bottom-Right Setting the presentation timerTo cancel the timer, perform the following steps How to use the Timer On key?Hiding the image Or go to the System Setup Basic Panel Utilizing FAQ functionLocking control keys Freezing the imageAdjusting the sound level Adjusting the soundTurning off the Power on/off ring tone Operating in a high altitude environmentShutting down the projector Personalizing the projector menu displayMenu operation Menu systemMain menu Sub-menu Options Language BasicAdvanced Description of each menu Save Settings TemperatureTimer Auto Power OffSleep Timer System Setup Basic menu System Setup Advanced menuAudio Settings Menu SettingsSettings Lamp SettingsReset All SecurityFAQ-Features Service FAQ-Image InstallationInformation menu CurrentCare of the projector MaintenanceSetting Auto Power Off Setting Lamp mode as EconomicLamp information Getting to know the lamp hourTiming of replacing the lamp Turn the power off and disconnect Loosen the screw that secures the lamp MaintenanceReplacing the lamp Tighten the screw that secures the lamp Setup Advanced Lamp Settings menu Resetting the lamp timerDisplays. Press to highlight Reset lamp Restart the projectorIndicators OrangeOff Red Troubleshooting Projector specifications SpecificationsDimensions Timing chartSupported timing for PC input Supported timing for Hdmi Hdcp input Resolution ModeSupported timing for Video and S-Video inputs HorizontalSupported timing for Component YPbPr input Signal Format Horizontal Frequency kHz Vertical Frequency HzLimited warranty Warranty and Copyright informationCopyright DisclaimerFCC statement Regulation statementsEEC statement Weee directive

MP624, MP623 specifications

The BenQ MP623 and MP624 are compact and versatile projectors that cater to various presentation needs in both professional and educational settings. These projectors are designed to deliver high-quality visuals coupled with user-friendly features, making them ideal for business meetings, classrooms, and small to medium-sized venues.

One of the standout features of the MP623 and MP624 is their impressive brightness output. With a brightness of up to 2500 ANSI lumens, these projectors ensure clear and vivid images, even in well-lit environments. The 2000:1 contrast ratio further enhances image quality, providing deeper blacks and more vibrant colors, which is essential for creating engaging presentations.

Both models utilize DLP (Digital Light Processing) technology, known for its reliability and high performance. DLP technology minimizes the risk of color degradation over time, maintaining consistent image quality. This technology also enables the projectors to produce sharp images with smooth motion, making them suitable for displaying video content as well as static presentations.

The MP623 and MP624 come equipped with a native resolution of XGA (1024 x 768), which is ideal for displaying standard presentations and graphics. They also support multiple resolutions, allowing for flexibility in different usage scenarios. The projectors are compatible with various input sources, including HDMI, VGA, and composite video, making it easy to connect to laptops, desktops, and other multimedia devices.

Portability is another key characteristic of the MP623 and MP624. Weighing in at just a few kilograms, these projectors are lightweight and easy to transport, perfect for professionals on the go. Their compact design does not compromise on performance, and they can be quickly set up in different environments, from conference rooms to classrooms.

User-friendly features are also prominent in these models. The intuitive menu system and remote control make it simple to navigate through settings and customize presentations. Furthermore, the inclusion of various preset modes allows users to optimize their viewing experience according to the content being displayed, whether it be text, graphics, or video.

In addition to their impressive technology and features, the MP623 and MP624 are designed with longevity in mind. They are equipped with long-lasting lamps, offering extended usage hours and minimizing maintenance costs. The efficient cooling system helps prolong lamp life while ensuring quiet operation, which is critical during presentations.

In conclusion, the BenQ MP623 and MP624 projectors combine portability, high brightness, and advanced DLP technology, making them excellent choices for professionals and educators seeking reliable and versatile projection solutions. With their user-friendly features and quality image output, these projectors are well-suited for a wide range of applications, enhancing presentations in any setting.
Top Page Image Contents