BenQ user manual Connecting a computer or monitor, Connecting a monitor MP525 ST only

Page 19

Connecting a computer or monitor

Connecting a computer

The projector can connect to both IBM® compatibles and Macintosh® computers. A Mac adapter is needed if you are connecting legacy version Macintosh computers.

To connect the projector to a notebook or desktop computer:

1.Take the supplied VGA cable and connect one end to the D-Sub output jack of the computer.

2.Connect the other end of the VGA cable to the COMPUTER, COMPUTER 1 or COMPUTER 2 signal input jack on the projector.

3.If you wish to make use of the projector (mixed mono) speaker(s) in your presentations, take a suitable audio cable and connect one end of the cable to the audio output jack of the computer, and the other end to the AUDIO or AUDIO (L/ R) jack of the projector.

4.(MP525 ST only) If you wish, you can use another suitable audio cable and connect one end of the cable to the AUDIO OUT jack of the projector, and the other end to your external speakers (not supplied).

Once connected, the audio can be controlled by the projector On-Screen Display (OSD) menus. See "Audio Settings" on page 49 for details.

The built-in speaker will be muted when the AUDIO OUT jack is connected.

Many notebooks do not turn on their external video ports when connected to a projector. Usually a key combo like FN + F3 or CRT/LCD key turns the external display on/off. Locate a function key labeled CRT/LCD or a function key with a monitor symbol on the notebook. Press FN and the labeled function key simultaneously. Refer to your notebook's documentation to find your notebook's key combination.

Connecting a monitor (MP525 ST only)

If you want to view your presentation close-up on a monitor as well as on the screen, you can connect the MONITOR OUT signal output jack on the projector to an external monitor following the instructions below:

To connect the projector to a monitor:

1.Connect the projector to a computer as described in "Connecting a computer" on page 19.

2.Take a suitable VGA cable (only one supplied) and connect one end of the cable to the D-Sub input jack of the video monitor.

Or if your monitor is equipped with a DVI input jack, take a VGA to DVI-A cable and connect the DVI end of the cable to the DVI input jack of the video monitor.

3.Connect the other end of the cable to the MONITOR OUT jack on the projector.

• The D-Sub output only works when an appropriate D-Sub input is made to the COMPUTER

1 jack.

If you wish to use this connection method when the projector is in standby mode, make sure the Standby Monitor Out function is turned on in the SYSTEM SETUP: Advanced menu. See "Standby Monitor Out" on page 49 for details.

Connection 19

Image 19
Contents Welcome Table of contents Safety Instructions Important safety instructionsSafety Instructions 3000 m Feet Installation Introduction Projector featuresShipping contents Projector exterior view Projector Controls and functionsActivates the selected On-Screen Display OSD menu item Selects an available picture setupMode/Enter ModeDigital Zoom + Remote controlVolume + FreezeTimer Set up Remote control effective rangeReplacing the remote control battery Timer On Up/DownFront Ceiling Positioning your projectorChoosing a location Front TableObtaining a preferred projected image size Positioning your projector Inch Projection dimensionsVGA cable Video cable ConnectionHdmi cable To connect the projector to a notebook or desktop computer Connecting a computer or monitorConnecting a computer Connecting a monitor MP525 ST onlyConnecting audio Connecting Video source devicesTo connect the projector to a Component Video source device Connecting a Component Video source deviceConnecting an Hdmi device MP515 ST only To connect the projector to an Hdmi deviceTo connect the projector to an S-Video/Video source device Connecting an S-Video/composite Video source deviceStarting up the projector OperationAdjusting the projection angle Adjusting the projected imageAuto-adjusting the image Correcting keystone Fine-tuning the image size and clarityUsing the remote control Using the OSD menuPreferred language Using the menusUse / to highlight the System Setup Basic menu Press / to select aTo the Security Settings Using a security cable lockUtilizing the password function Setting a passwordEntering the password recall procedure If you forget the passwordChanging the password Disabling the password function Changing Color Space MP515 ST only Switching input signalSelecting the aspect ratio Magnifying and searching for detailsAbout the aspect ratio Selecting a picture mode Using Wall ColorOptimizing the image Adjusting Brightness Fine-tuning the image quality in user modesSetting the User 1/User 2 mode Go to the Picture Picture Mode menuAdjusting Brilliant Color Adjusting ColorAdjusting Tint Adjusting SharpnessTo adjust the settings To cancel the timer, perform the following steps Setting the presentation timerTo highlight Off and press Mode/Enter Hiding the image How to use the Timer On key?Freezing the image Utilizing FAQ functionOperating in a high altitude environment To activate the High Altitude ModeLocking control keys Personalizing the projector menu display Adjusting the soundAdjusting the sound level Turning off the Power On/Off Ring ToneShutting down the projector Once the cooling process finishes, a Power Off RingBasic Main menu Sub-menu OptionsAdvanced Informa Description of each menu Color Tint TemperatureSave Settings TimerSleep Timer Menu SettingsAuto Power Off Blank TimerSecurity Audio Settings Standby Monitor OutLamp Settings SettingsFAQ-Features Reset AllFAQ-Image InstallationCare of the projector MaintenanceExtending lamp life Setting Lamp Mode as EconomicLamp information Getting to know the lamp hourStatus Message Timing of replacing the lampReplacing the lamp Maintenance Resetting the lamp timer Thermal events IndicatorsLight Status & Description Power events Lamp eventsCause Remedy TroubleshootingSpecifications Ceiling mount installation DimensionsMm W x 114 mm H x 236 mm D Supported timing for PC input-MP515 ST/MP525 ST Timing chartSupported timing for Hdmi Hdcp input-MP515 ST Supported timing for Component-YPbPrinput-MP515 ST/ MP525 ST Disclaimer Warranty and Copyright informationLimited warranty CopyrightWeee directive Regulation statementsFCC statement EEC statementRegulation statements
Related manuals
Manual 66 pages 478 b

MP525 ST specifications

The BenQ MP525 ST and MP515 ST are innovative projectors designed to deliver high-quality visuals for both educational and business environments. With a blend of advanced technologies and user-friendly features, these projectors offer exceptional performance.

Starting with the core characteristics, both models boast DLP (Digital Light Processing) technology, which ensures sharp images with vibrant colors and excellent contrast ratios. The native resolution of these projectors is XGA (1024 x 768), suitable for detailed presentations and videos. The brightness level for the MP525 ST is typically around 2500 ANSI lumens, providing sufficient illumination for well-lit environments. The MP515 ST, while slightly less bright, still delivers adequate performance for dimly lit rooms, making both models versatile for various settings.

One of the standout features of the BenQ MP525 ST is its short-throw projection capability, allowing users to display large images from a short distance. This is particularly beneficial in smaller rooms where space is limited as it minimizes shadows and enables presenters to stay close to their audience. The throw ratio is approximately 0.6:1, meaning it can project a large image within just a few feet from the screen.

Both projectors come equipped with a comprehensive connectivity suite, including HDMI, VGA, S-Video, and composite video inputs, ensuring compatibility with a wide range of devices such as laptops, DVD players, and gaming consoles. They also feature built-in speakers that deliver clear audio without the need for external sound systems, making them convenient for quick setups.

In terms of usability, the BenQ MP525 ST and MP515 ST are designed with user-friendly interfaces and remote controls. They include features like keystone correction to help adjust the image shape, ensuring perfect alignment even when the projector is angled. Additionally, the projector’s lamp life is impressive, reaching up to 4000 hours in economic mode, which reduces the need for frequent replacements and lowers operational costs.

In conclusion, the BenQ MP525 ST and MP515 ST projectors are excellent choices for educators and presenters who require flexibility, quality, and ease of use in their projection equipment. With their advanced DLP technology, short-throw capabilities, and versatile connectivity options, these models cater to diverse presentation needs while ensuring that every image is displayed with clarity and impact.