BenQ MP525 ST user manual Resetting the lamp timer

Page 56

10. Tighten the screw that secures the lamp.

• Loose screw may cause a bad connection, which could result in malfunction.

• Do not over tighten the screw.

11. Ensure the handle is fully laid flat and locked in place.

12. Replace the lamp cover on the projector.

13. Tighten the screws that secure the lamp cover.

• Loose screw may cause a bad connection, which could result in malfunction.

• Do not over tighten the screw.

14. Restart the projector.

Do not turn the power on with the lamp cover removed.

Resetting the lamp timer

15.After the start-up logo, press Menu/Exit and then press / to highlight the SYSTEM SETUP: Advanced menu.

16.Press to highlight Lamp Settings and press Mode/Enter. The Lamp Settings page displays.

	17. Press to highlight Reset Lamp Timer and	Notice
	press Mode/Enter. A warning message	Reset Lamp Timer?
	displays asking if you want to reset the lamp	Reset Lamp Timer?
	displays asking if you want to reset the lamp
	timer. Highlight Reset and press Mode/Enter.	Reset	Cancel
	The lamp time will be reset to "0".

Do not reset if the lamp is not new or replaced as this could cause damage.

56 Maintenance

Image 56

Contents

Welcome Table of contents Important safety instructions Safety InstructionsSafety Instructions 3000 m Feet Installation Projector features IntroductionShipping contents Projector exterior view Controls and functions ProjectorSelects an available picture setup Mode/EnterMode Activates the selected On-Screen Display OSD menu itemRemote control Volume +Freeze Digital Zoom +Remote control effective range Replacing the remote control batteryTimer On Up/Down Timer Set upPositioning your projector Choosing a locationFront Table Front CeilingObtaining a preferred projected image size Positioning your projector Projection dimensions InchHdmi cable ConnectionVGA cable Video cable Connecting a computer or monitor Connecting a computerConnecting a monitor MP525 ST only To connect the projector to a notebook or desktop computerConnecting Video source devices Connecting audioConnecting a Component Video source device Connecting an Hdmi device MP515 ST onlyTo connect the projector to an Hdmi device To connect the projector to a Component Video source deviceConnecting an S-Video/composite Video source device To connect the projector to an S-Video/Video source deviceOperation Starting up the projectorAuto-adjusting the image Adjusting the projected imageAdjusting the projection angle Fine-tuning the image size and clarity Using the remote controlUsing the OSD menu Correcting keystoneUsing the menus Use / to highlight the System Setup Basic menuPress / to select a Preferred languageUsing a security cable lock Utilizing the password functionSetting a password To the Security SettingsChanging the password If you forget the passwordEntering the password recall procedure Disabling the password function Switching input signal Changing Color Space MP515 ST onlyMagnifying and searching for details Selecting the aspect ratioAbout the aspect ratio Optimizing the image Using Wall ColorSelecting a picture mode Fine-tuning the image quality in user modes Setting the User 1/User 2 modeGo to the Picture Picture Mode menu Adjusting BrightnessAdjusting Color Adjusting TintAdjusting Sharpness Adjusting Brilliant ColorTo adjust the settings To highlight Off and press Mode/Enter Setting the presentation timerTo cancel the timer, perform the following steps How to use the Timer On key? Hiding the imageUtilizing FAQ function Freezing the imageLocking control keys To activate the High Altitude ModeOperating in a high altitude environment Adjusting the sound Adjusting the sound levelTurning off the Power On/Off Ring Tone Personalizing the projector menu displayOnce the cooling process finishes, a Power Off Ring Shutting down the projectorMain menu Sub-menu Options BasicAdvanced Informa Description of each menu Temperature Save SettingsTimer Color TintMenu Settings Auto Power OffBlank Timer Sleep TimerAudio Settings Standby Monitor Out Lamp SettingsSettings SecurityReset All FAQ-ImageInstallation FAQ-FeaturesMaintenance Care of the projector Setting Lamp Mode as Economic Lamp information Getting to know the lamp hour Extending lamp lifeTiming of replacing the lamp Status MessageReplacing the lamp Maintenance Resetting the lamp timer Indicators Light Status & Description Power eventsLamp events Thermal eventsTroubleshooting Cause RemedySpecifications Mm W x 114 mm H x 236 mm D DimensionsCeiling mount installation Timing chart Supported timing for PC input-MP515 ST/MP525 STSupported timing for Hdmi Hdcp input-MP515 ST Supported timing for Component-YPbPrinput-MP515 ST/ MP525 ST Warranty and Copyright information Limited warrantyCopyright DisclaimerRegulation statements FCC statementEEC statement Weee directiveRegulation statements

Related manuals

Manual 66 pages 478 b